Search results

Anything below 30A is going to be awful in Winter when the ambient water temperature is a lot lower. Do you not own the property?

Is that junction box actually part of a Ring? If the answer is yes you could remove that completely and replace it with surface backbox and a single socket. This would make it easier to remove the Dishwasher completely for any future maintenance a 13A fused connection unit could be suitable it...

Actually you're right John, needs three x three way Wagos

You just need to strip a bit of the black cable sheath off and literally install the brown to the Wago block with Browns, The Earth to the Wago block with Earths and the Blue to the Wago block with blue cables. *Edit Requires 3 New Wago blocks or similar to accept three conductors*

Did the guy at the Consumer unit have any kind of tester? How many circuits? Regardless of the time taken this wasn't done correctly if the guy walking about didn't have any Test equipment, he'd need to check socket measurements/polarity at the very least and RCD trip times if you have any? Why...

Does that Switched Fused connection unit Feed the Socket? If so plugging your fresh air into it should be fine.

Normally up to 6mm for FCUs but it depends on the manufacturer.

IR only really reduces when joints are made outside from my experience

I try not to use plastic plasterboard boxes, I tend to fit a noggin and use metal boxes as they are better from a maintenance aspect and often I have found the lugs on the plastic boxes to be temperamental. I normally tuck all cables inside the back box in a loop then and place a piece of...

The only way of removing that without disruption is to pull the cable up/out enough to cut it with a multi tool with a metal cutting blade or angle grinder but really not worth the grief. Then hope the conductors push back down!

Nothing to do with your question as clearly Flameport & co have answered that, but Is that SWA coming out the Wiska box armour earthed anywhere? Hopefully there's a piranha locking nut inside it or at the other end.

Not much to add that hasn't already been mentioned but: Was this person supplying that MEM 2000 as part of the "installation"? Where is all that Trunking & was that already installed at the house end??

The Insulation will have a derating factor due to thermal effects. > Clicky

How many people live inside the property it's not a HMO is it?

Indeed, it is a little strange that the MCBs are slightly smaller than the RCDS. Hopefully the prongs are long enough!

Have you managed to locate a fault on the ring in your Mini CU?

The Busbar certainly needs to be checked, looking at the part on the left it doesn't even look like two of those circuits are even supplied. Not sure what it's been cut with, certainly not a sharp hacksaw or something suitable. I hate seeing exposed copper busbar like that makes me shudder. I...

I was wondering where that post was going at first Ragnar O Matron!

Stuffing glands https://www.tlc-direct.co.uk/Main_Index/Cable_Accessories_Index/Gland_Compression_Nylon_1/index.html

Is there a reason you really need to move it? That unit will light up quite a bit of that area. You have an opportunity to do a temporary fix first and see just how much exactly the light extends to. I have one of these lights down my side alley > l...