Search results

Cheers Dan I need a diverter valve cartridge and handle bush, but only have a photo of the valve to go by.

Hi Can anyone recommend somewhere i can obtain spares for a Porcelenosa built in shower valve ? Thanks

It will be covered under warranty whether the paperwork was completed or not. Basic consumer rights. If warm front installed it, it may well be an install fault. Everyones problem to fix but the end user but the end users problem to live with.

Get real paper shuffler. Hows that helping him sort his problem. If the waters being dumped through the prv at 4 am it may be the frost stat is kicking in & firing the boiler but the pump isn't running. With the nature of most boilers but esp oil boilers the unit will overheat before the...

Hi. I need to test a capacitor. Am i correct in thinking they are to be discharged first by shorting the terminals ? also am i correct in thinking i use the F setting on my multi meter which goes from 2n to 200n and then 2u to 200u as per cap rating ? Many thanks also cap should be within...

yes C02. You must get a pump if your servicing oil boilers. You get smoke at 10.5% sometimes. The manufactures instructions are guidance only and you set to their instructions only if achievable so if its set at 12% it doesnt mean its correct if its smoking so you have to wind it back. If the...

i :lol:

setting c0 above 12% was asking for trouble. If commissioning print off @ 12% then wind it back to 11.5 %. Are you using a smoke pump ? first and last tool to use if any doubt a the pump never lies. Also try a narrower nozzle 60' is less likely to give impingement even if less efficient.

a post that deserves a sensible response ! guessing i would say you have low pressure which may be caused by an external below ground leak. You may have a check valve somewhere on your plumbing system and guess also you have a sealed system ( ie, combi) . When you open a tap on the top...

:lol: :lol:

Your question and spelling is taking the pi. ss

Helllllooooooooo

Yes. Call your local gas man and request a combi lead adjustment.

Maybe your turning into a dog and therefore have a heightened sence of hearing. I would consult a Doctor ( or vet ) asap.

Why not use their diagram and just connect interstat (pin 9) to hw valve brown instead ?

put a link up to the wiring instructions and i might be able to design & email you a wiring diagram if needed

think you may need a relay in there somewhere.

Say you did this 4 months ago but only just decided to share your wisdom of idiots plumbing ? Took you that long to bleed the radiators did it ?

I love that. Whack it in by someone who specialises in fitting boilers quick & cheap. Very similar, an exhaust pipe to a modern boiler. I should imagine you could take your house soon to an industrial estate where they will fit the boiler while you wait with a cup of coffee in a plastic cup on a...