Search results

If you don't have any joy with adjusting screws then it may have a centrifugal govenor in the crank case which might have failed. These givce similar problems.

That is because they are reinforced ( with rebar I guess ) so once you feel resistance to a masonary drill swithc to larger HSS then back to masonary. That is if you hit any, you may not.

https://projectnumber9com.wordpress.com/2020/08/26/cladding-a-concrete-panel-garage/...

It won't hurt to ask them.

Yes a cherry picker would be ideal if you can get it close enough to the building. How much it costs depends on how close you are to the depot. Because I don't live near any hire companiess a ( proper ) scaffold tower proved to be the most economical for me. You will need to get some prices. Can...

Is the higher insurance costs because of the higher price of the vehicles and higher repair costs?

Watched B & C last night and they had a rotten old Merc that the expert said was due to Mercedes using recycled steel at one time. So not really just Chinese

I think you have amswered your own question. Clean them more often.

Have you got suspended or solid floors either at the base of the wall the consumer unit is installed on or where the 3 core passes through the wall to the outside. Just wondering how hard it would be to find a joint. So the armour is connected to earth at the main consumer unit?

You will have to apply for planning permission and building regulation approval they will either pass or fail your approval for building regs according to the plans submitted which will need detailed drawings of all works both under and above ground. Who is doing the design work?

How are you going to put more boards alongside the others when he has took his bends under the joists

Doesn't look right to me but never seen one before. I would think it would soon clog up with limescale. Send Grohe your pic and ask them. https://www.grohe.com/en-GB/product/euroeco-cosmopolitan-t-self-closing-shower-valve-1-2-chrome-36267000 theere is a diagram in the drop down menu showing the...

Get a builder to replace it before more falls off and injures someone.

Or...

You could perhaps try here...

You will need a steel to replace the wall and probably building regs approval.

In that case I don't think visually you will tell the differnce

https://www.bes.co.uk/copper-monobloc-tap-tails-m10-x-15mm-19800/

What do you mean by a gazebo? 4 corners and a roof with 4 open sides? If so what is the roof construction going to be?

Use path or lawn edging and overlap the joints