Search results

I have the standard u shaped bath trap but it is too tight on this new bath I have put in I have 65mm of clearance. I don’t want to chop a hole out below the trap in the floor Are there some slimmer versions. I wonder if this might be slimmer than the one I have...

https://www.toolstation.com/washing-machine-plastic-valve-cap/p30766 Would this work ?

Anyone ?

The stopper for this outlet has disappeared. I’ve tried a Mac alpine 1 1/4 and 1 1/2 caps but they are too big. Any idea what part I need?

I have a taxi duotec and the pressure was at 0.5 bar and still working the other day. I topped up quite a bit to top of 1 bar. The next day the pressure was into the middle of 2 bar. Does this mean the pressure sensor is playing up ? Had it serviced in march and the vessel was pressurised...

Ok thanks for your help. Will get to the merchant

Hi I am going to change a broken tile at our squash club but not sure which tile I need. Someone has left some spare tiles at the club but we are not sure if they will work. Can you guys tell me if these will work and if not which tile to buy from the merchants. I am used to using slates but...

Had it balanced and better now. Got a external track rod end needs doing as well.

They were changed because it creaked when turning left or right on full lock or a tight circle. That issue has been fixed now. I think the issue is the power steering needs to be used and the balancing

On the end which attaches to the wheel. Forget the name of it. The rubber section waterproofs the bearing connection on the shaft I think

Sorry front drive shafts

Yes it might be the steering which needs to bleed. I haven’t driven much since it was done. Will get it retracted

On full lock or near it and on both sides the steering clicked and creaked. This has now gone. So the axel’s were replaced both sides. But I am getting a slightly different sound and I was thinking it is down to the tracking 2015 Citroen berlingo 1,6 van

The front axles left and right were replaced plus the collars which are rubber Citroen berlingo 1.6l van

The front left and right axles have been changed on my van. I get a little stiffness when I turn the wheel more sharply. Does this mean I now need the tracking resetting? It wasn’t reset by the mobile mechanic who did it.

I am removing the old victorian pots on a chimney and replacing with basic gas terminals as none are actually working chimneys. I am also repointing the chimney using NHL5 lime and sand. I want to use cement to flaunch using a 3:1 mix. But will I be ok adding some lime into this mix to help...

Do you mean risk from CO poisoning? There are 40 deaths per yr on average in the U.K. Walking in central London puts you in more danger

my 17 yo valiant eco max plus is loosing pressure. Over 10 days it drops from 1.5 to 0.8 bar. There is no water leak in the boiler currently. In December there was a leak under the boiler around the condensate outlet. The prv is not being activated The EV is new a year ago and pressured...

Looks like the system has made two posts. So this is the duplicate. It can be deleted.

I think the top needs replacing (flaunching). So the pots will have to come off, but I think it will be easier to replace with breathing vents. We are getting water into one flats chimney plus the bottom flat has water also. I thought £50 for raking and repointing.