Search results

Hi all, I have a crack in my bathroom ceiling, I have filled and painted a number of times, but guess what it comes back! This morning I decided to bite the bullet and cut out a couple of inches wide back to the plasterboard and insert skim before repairing. Having started I can see someone has...

So looking at that if I want to commit murder I swig a few beers and run my victim, over. Then do three years, well 1 in jail 1 in open prison and then get out on parole. ;)

An impact driver might help. But try the extractor first.

What a B******! Totally uncalled for it wasn't Godzilla for **** sake!:mad:

Total guess, but I wonder if the laptop needs slightly more power to boot up than run. Might be the battery although showing charge is in fact slightly low on the voltage it is putting out. Can you remove and test the battery voltage with a meter?

PS a few meal worms might be well received, by him and the birds.;)

Frogs don't live in ponds much they only hang around them in damp areas and use the pond only when getting fruity with lady frogs. Tadpoles might suffer but chances are Freddy will be OK as said a bit of a water change will be a good idea anyway. Pop the hose in at just a trickle for a couple of...

Star washer, but that will scratch, you might find a rubber washer (bath tap) works otherwise if you keep it in one place Loctite on the thread (if it is unscrewing rather than just slipping down. Loctite can be undone but it takes some effort...

I got one of these off amazon picks up the nails/screws in the stud , much more positive than the electronic kind. Mind you 18mm ply is asking a bit, but I doubt the other type will work at all. :unsure:

I certainly would not be happy with that. I would expect making good to include boarding and plastering. Painting would not normally be covered.

Well he hasn't finished yet, unless you requested an industrial look with exposed acrow props! As said he cannot fit doors to that.

I would certainly replace any old radiator valves, copper pipe will last many years assuming you have not had any problems with it so far. There were some really dodgy pipes around after 1965 when Rhodesia declared UDI and cut off the supply of copper but by now they should have shown up if you...

That's not a lock shield I think it is a thermostatic one with the head removed and the blanking cap fitted, if fully screwed down it should depress the pin and close the valve. Possibly someone just put the cap on loosely to allow the valve to pass water, a bit odd!

Yes I have finished the insulating today, now all snug! (y) :giggle:

I assume you have tried new batteries? Many new batteries come with a sticker that needs pealing off (it has a bad taste I understand to stop kids swallowing them) my Mrs almost got caught putting one in without pealing it recently.

PS I know in the picture it looks like in runs down both ends but it does drain to outside just my bad photography I guess!:LOL:

Update if anyone interested. Went with a Manrose MF100T. Old vent on wall now redundant. Spent the best part of a day wheedling the flat duct through the pitched roof and through the soffit, but working fine now!(y):giggle:

Have you checked to see if it has a battery on the door obstruction sensor, mine although not your sort has a sensor bar on the bottom of the door when the battery runs down it fails to close.

As said go to the official McAfee site and download their removal tool. (y)

I have got to the stage I put a bit of silicone grease in them and operate a few time before I install them!