Search results

I would expect that there is still a tamper fault on the system

Hope you didnt get yourself in trouble with the wife lol

Must be using the same google account

Should have 12v between + and -R

Dont see why it wouldnt work

The psu is around 15vdc so would try connect in place of psu rather than battery.... then u wont have a permanaent mains failure alert

It seems clear to me that james needs to use his multimeter to check the voltage of the bell tamper return feed, and check the resistance of the global tamper circuit, and share the results. My guess is he's still sat on the landing with the system part armed waiting for it to tamper again :eek:

A tamper fault will occurr regardless of wether or not the system is armed

Yes

Assuming the garage is part arm 2 you will need to select part arm 2 omit for all the zones u dont want included in the part arm

And enable level set

Is level set enabled? Is keypad and tag reader both allowed to disarm area b?

Yes will need relearn all devices to new panel and obviously program up. What version is the current panel

Scantronic 92xx

Don't let pyronix hear you saying that

U will need to disconnect the 12v supply for the bell box from the control panel, and also disconnect the bells internal battery. And link out the tamper return if u will be needing to use the alarm in the meantime

No bell arm fail in global options?

One of the devices has gone into tamper, and now restored. Should tell u which device in the logs

It's in the installation manual rather than the programming manual

Yes new contact should sort it