Search results

oh right, thanks!

Ahh right thanks ! The guys who fitted the system didn't put one on but i bought one straight away after inspecting their handywork

After looking into replaccing the oven element I discovered there's another element that looks similar to the grill one, but located underneath the oven.. If it blows would it be necessary to replace it or could I leave it?

Hello All, Daft question here.. After injecting Sentinel into an indirect heating system, would it be worth draining some water from the header tank up in the loft afterwards? (I was thinking of excess pressure on the ball cock valve by the float) I realise the level wouldn't go up much with...

Is it and other makes effective?

oh right, thanks

Is jetwashing the best way to clean it or is products like wetandforget a goog alternative? Ive jetwashed before and hard work plus some blocks are wearing away

Thanks mate, I'll have a look

Thanks. Still had trouble but used the model number as you said on the neff website, got the part number from a downloaded pdf diagram and then used the part number to finally get it... Phheeeew.. Lol thanks again

I can't get an exact replacement. Would a different remote for linsar tv work?

I have a Neff oven, model B1GCCOAN0B I can find the oven if i Google the number, but get a "model not found!" when trying to find parts. What am I going wrong?

For fellow novices : Unscrewed the rings on Base of the switches and pulled cover off. Unscrewed the 2 screws at the top and slid unit up backing plate to unplug it from bottom unit, took back off unit and removed the 2 thin wires to the clock

Thanks ian and gas, will just do that

Dug out some papers. Baxi Bermuda 552 with an indirect loft tank fitted. The reason for wanting to change the control box is because the timer clock is noisey and i never use it. Can i disconnect the power to the clock mechanism and keep the switches?

Ah right, thanks for the info. Is there a compatible replacement i could get where i can look up the corresponding terminals to wire it up? Just something basic without fiddly timer functions

I've seen another thread on here, but wired differently to mine. I have 4 cables running into the Randall 3020P control box. The wiring into the terminals as follows : 1 = empty 2 = x1 red 3 = x2 neutral (1 black, 1 brown) 4= 1 black 5= empty 6= x2 brown 7 = x3 blue Earth = x3 green&yellow...

Thanks for the advice, much appreciated

Hello, I ordered a sample of the film, and aesthetically looks good when fitted to the tukip glass, only the odd tiny bubble. I was thinking though, is it on par with the proper safety glass? The film has safety standard conformity but would the manufactured safety glass be better for...

Will look into it, thanks for the replies