Search results

More pictures from further away might help, but I would think you need to sort one row at a time after removing the top few rows

Don't they normally have a pull switch or remote control for the fan

Completely agree with endecopt. Just paint it with floor paint and let it breathe

"The leak is below the main cavity, not below the compressor. Would it be worth having repaired" There is often a tray on top of the compressor where melted ice water collects and evaporates during normal operation. If you have one and it is dry then check for the means of water running in to...

The only thing I would suggest is not to clad it with wood. You are just making work for the future to maintain it. Have you ever seen an old shed that still looks good years later. To me cladding is just another passing fashion. Get the brickie to point it properly.

Sorry I misread your 30mm as being 50mm

If you have a large excess for subsidence on your policy that might also mean it's not worth claiming.

https://plumbingsuppliesdirect.co.uk/monument-46-x-50mm-waste-nut-box-spanner-mon308/ Perhaps this will do it Or this...

Just reposting what the goverment web site says

Motor bearings should be available an fairly easy to replace . Drum bearings may be more difficult but you should be able to get equivalents. If you have to split the drum then personally I would not bother although it has beeb done and there are threads talking about it fairly recently. not...

Ever heard of modesty lighting in bedrooms?

If you can't find it in terms and conditions of your policy then ring and ask them.

If you can't drive how about a bus pass. Does that have enough detail on to identify you. Plus some of these Acceptable photo identification documents You must provide one of the following: current valid passport for any country current biometric residence permit for the UK current full or...

No screw?

Does it turn freely with the belt off. If it does then perhaps the motor has seized although that woul be an unusual thing to happen. Did you check it spun freely when you were looking for brushes

Like my old Chevette the oil passed through the engine too quickly to ever need replacing :LOL:

Dynamic pricing should be made illegal as far as I am concerned. Lots of hotels and airlines do it and it is a bl**dy cheek. Hope Tesco don't start increasing prices when they are busy.

Is that a screw going through the front of the tap. you will probably need to remove that if it is. If not you need a box spanner or socket that will cover all the flats and prevent distortion as you undo it.

I can agree with exicuteing a good few of them to get numbers down. Not releasing them early

Would you not be better with just EDPM on the roof or fibreglass, it's not very big or going to be taking any weight is it...