Search results

change the sensor in the dry pocket left hand pipe leading to divertor

do not drain the boiler before removing the big screw do it with boiler pressurised stick a towel under the pump to catch any water no need to let it run once it shows . the little black bleed doesnt need removed just a turn and a half will do it . This trick can get the water moving turn your...

have you opened the little black air release on top of the pump . also leave screw out middle of pump to get rid of air . Can be a nuisance to get all the air out sometime constantly turning it on and off will shift it With boiler off the other micro switch on top of divertor is that in rest...

The manky side fill it with brick acid for 20 mins then flush it thoroughly , be as good as new...

Two or 3 skilled men equipment labour an materials soon adds up and no its not just about digging holes

at least a thousand quid if the main is running up the pavement in front of your garden . dearer if road crossings or really long garden

From what i see your not asking for a breakdown in costs so not being picky you are just asking to know what has been done and fitted a totally normal and basic request which shouldnt have to have been made as it is basic telling a cust what you have done after you have done the job

What boiler do you have and what problems have you been having . Have you looked at how much the actual manufacturer charges for boiler cover

29 years ago now at least a hundred thousand gallons went into the gas network and took at least 6 months to get it fully out average compensation of 200 quid paid with some of the affected getting 400 quid. Overtime bill was horrendous as they brought hundreds of personnel to it from...

there are maps for electric and water but they are not always very accurate . There is a device for locating electric and cable tv and it can be used to find metal water pipes . I have seen simple mole job go wrong and ended up costing several million quid in repairs and compensation

not to locate drains or plastic water pipes . Electric supply and cable tv yes

so the sales rep did pick up on it then and answered you. Thats the trouble with some of the reps they have not been issued with xray vision due to budget cuts

use one of these to connect onto existing pipe inside will allow for any difference in pipe size ...

pretty obvious why by your picture . And should it not have been one of your first questions to them What damage will be done to my drive and what sort of reinstatement will you do pretty basic standard question asked by the vast majority of people

. How long do you think pay back would be for buying and having an undersink heater

Cant see them moling that they will more than likely dig this

The seals are a wee bit awkward to get out a bent pick is handy for them out of the countless plates on 105`s i have had in and out i have only ever had one original seal leak so you are a wee bit unlucky You could try a bit of silicone grease onto the existing seals see if that works

Yep not unreasonable to ask what the actual repair was and what has been changed etc

Have a look at wickes they are made by stelrad and a better rad

Dont make them because there is no demand for them . Here is an elbow type . if you dont want to go with madrab idea https://www.bes.co.uk/pipe-tube-fittings/pipe-fittings/compression/compression-wallplate-elbow-22mm-x-3-4in-17717/