Search results

As a rule the glittery bits tend to be the asbestos replacement board. I had them in a soffitt I had it tested to be sure though.(y)

Google Pipe strap wrench try to get one with a rubber strap that is your best bet.

Any help? https://www.qettle.com/qettle-original-and-mini-spout-seal-kit

Try wrapping in kitchen towel and soaking with White vinegar or better still a descaler like Limelite or Viakal left overnight. Then rinse off and run the tap a couple of times to clear any remaining descaler. Should ease removal or even clear the problem.

Thank you it's always nice when people take the trouble to post an update (y)

Command are good but I would not trust them in a steamy room like a bathroom. Wall plug and screw. (y)

Careful we cannot assume anything, your question should be how does the wall identify! (y) :giggle:

Yes this stuff is good, but don't be fooled by the suggested coverage, your old tarmac will suck it up like a drunk in a whisky distillery! :giggle: Double what they say! https://www.thompsonsweatherproofing.co.uk/flooring/quick-drying-drive-seal/

Johnstones Aqua is my go to for water based, but use their undercoat.(y)

I am surprised they are getting through the shower head, is it fixed or on a hose that too will be rubber inside. I doubt the taps are shedding rubber as the still seem to work. Might be worth taking the head off and giving it a good flush into the bath in case it's something that has got into...

Well the flexi will have rubber under the braid, are you sure it's not black mould forming on the tap outlet? Our handbasin gets that from time to time.

Redo the lot, satinwood oil based yellows with age, so you will not get a colour match I'm afraid. If it is just the hand rail and newell post that are worn just do them the spindles being darker will not notice.

Yes seems the best way to go, shame is I used to know the engineers code, but this lot have changed it, but it will only take a couple of mins to swap so not a problem.(y)

Thank you

Thank you for your reply. Pic attached, the top cover retaining clip broke it has a bit of tape holding it on.;)

Hi can you help please? I have the above system put in about 15 years ago by a family run company APT, I had good service with the odd problem quickly sorted. They have been taken over by a larger firm that seems to be gobbling up small companies in the South East, a door sensor broke "cant...

Most things like tablets and phones you push and hold the off button till it starts rebooting (seems like ages) I had a quick google and found this if any help. Switch the mic off using the microphone mute switch on your Nest Mini. Press and hold on the top of the speaker where you see the LED...

Zinsser Bulls eye 123 would be the one to use (two coats), BIN is solvent based not suitable for an area that big, (you will be seeing pink elephants putting that much on in a confined area!);) Can you improve ventilation in the bathroom? One thing you might consider is repapering with thermal...

My DVR and HD video camera system uses the same power source as supplied by manufactuer (ESP) been fine for many years now. Three of the cameras and the DVD share one box, the extra cameras have their own supply.

I saw he tries to drive off I wonder if he jogged the policeman's hand?