Search results

The first choice of many installers. Although now owned by pyronix and has been for a while so not sure why they still calling it castle lol, and now accommodates upto 76 inputs

Wouldnt bother with arc unless your insurance requires it. Just get a quote to upgrade it to a v10 with app and maint contract. we are about 14 a month for contract with app, replacement parts and any self inflicted system issues charged extra

I would say the 17 is good value with any replacement included, but how often do u actually need to replace parts... Get a price from a few local companies may find them a bit cheaper im assuming its with chubb going off the picture you posted?

Yes but you will likely need an installer to use an ARC. I wouldnt bother, just cut out the middle man, youll get a notification straight to your phone if the alarm is activated with the app.

Firstly, like i say you will only have to replace the pcb and swap the wiring over. Secondlt , the enforcer is a wireless system and therefore has a smaller power supply. If you replace with this you will need to install a seperate 12v power supply for all your wired devices - pir's, zems...

You will have to relearn all the wireless devices/keyfobs aswell

Get a euro 46 v10 and digi wifi and all you will need to do is swap the pcb and the wiring over then reprogram everything onto the new system.

Yes on the change master code screen when it displays the *****'s, press C before entering the new code.

2 red wires in the bell will do, put new battery in, reconnect red 12v, close lid

Or disconnect the 2 red wires

It will disable the bell tamper on the panel, but the bell will still sound when u take the lid off

The first 1 that sees you needs to be in timed zones and any subsequent detectors you have to pass to get the keypad will be time inhibited

If you diable it in programming it wont let you leave until it is deleted under 'wireless device control, then u will have to relearn it afterwards

Program the zone as PA

What i dont understand is why uve ended up with an aerial aswell lol

Not sure how he can argue against the word of the manufacturer. Ultimately he is wrong and should replace

Press yes on that then u will hwt the option to change engineer/master/duress codes

P.s if you have access to the internet you can easily find out how to back door the panel which seems like an easier option then spending months trying to guess the code

And yes it will lock you out for a few minutes after too many incorrect attemts (i dont know how many)