Search results

We are older and need an eye level oven but being little workspace have no idea how to accommodate the hob. Currently we have a stand-alone oven hob but the space could take a full height cabinet for the oven. Ideas welcome.

Yep, good idea. Will last for my purposes but long pieces may be awkward to fit. Do they still make the original stuff and what's it called?

Ah, so from the outer face of the inner leaf to the outer face of the outer leaf I think is about 160mm incl. the cavity. So it looks like 64mm. Not much but is a low angle on the roof. Thanks, made me think it was easier with trig. So may need to trim the Botton of the rafter. Hope that aligns...

...the height where the rafters sitting on the top of the inner skin (top of the wall plate) to the top of the outer skin so that the rafters clear the wall and the soffit sits on the top of the outer skin for a given roof pitch (mine will be about 22 degrees ? Thanks.

At my eaves on a 1970s market concrete tile roof the bitumen felt is torn or rotting. I am looking for an eaves protector that is deeper than the 160mm so that it can extend up to or even under the lowest batten which I will take off after (hopefully) pushing up the tiles to gain access. Is...

I have Marley flat concrete tile 1970s roof. They have two grooves and I worry that when the moss grows in the gap, water running down will overflow into the underfelt (which is the old bitumen stuff in a 1970s roof). Is there a tool to gouge out the groove somewhere that will telescope right to...

I'm going to check my venting. I did allow for passage of air but I think the condensation is overwhelming when ice is on the roof. So i am going to check it out and maybe put in some under skin like on conventional tiled roofs just to catch the drips. Still thinking and maybe if it's just a...

The solution I have come up with is to cut out long slots between the joists inside (removing the ply overboards. There is enough room to spread out Bostik liquid Bituminous mastic plus if necessary I will remove more of the board between the other joists and staple up some drip barrier on the...

Old felt roof has corrugated metal overlay so sealed all round. Condensation forming on underside drips on old felt which leaks a bit. I need to gain access through holes either end and spray loads of pour-on (very liquid) sealer so it floods the surface and hopefully finds the cracks. So I need...

A strip of the old felt although fairly sound has torn away from the rafter along the line of the rafter (along it's edge) for about 1.5m. Any suggestions for fixing it back in place? I was thinking of using a bit of 2 x 1, stapling a strip of bitumen tape along the 1" edge, sticking the felt...

Yes! Another (good) Idea! And thanks to poster. I have now got a complete schedule including the beam size and BC script. Bypassing the AI by using AI :cool:

I want to remove the wall between kitchen and d/room. Instead of propping and chopping I am thinking of placing the required beam in situ first (right adj to the wall) then chopping out the old wall. I have plenty of time so no pressure as it's DIY. I understand for uncomplicated jobs like this...