Search results

Many thanks for replying. I will do as you suggest and let you know. Thanks again André

Thanks for replying, Yes I do have a multimeter.

Hi everyone, my washer developed a fault recently which I think I managed to trace to the pcb. The motor would struggle to turn the drum in the first part of the wash cycle. The more clothes the worse it would be but worked perfectly during rinses and spins. Having eliminated a slipping belt...

My apology JohnW2, I only bought a Multimeter to check my car battery and continuity. I totally understand what you mean now as I was being non specific which is not very helpful. Long days Sorry.

Thanks again for the replies. I am sure about the multimeter setting 200k. It was something I noticed and was not doing any specific tests. I have disconnected all appliances and sockets and traced all the wiring to their coressponding sockets. I am 100% sure I have not missed anything. I...

I have decided (unless there is a better option) to run a length of MMT2 to incorporate 2.5mm twin and earth six inches below the underside of the worktop and position 2 double sockets for the washing machine and dryer and the electric oven and hob ignition. I was hoping to save the tiles above...

The damaged section is all but one from the consumer unit so no way a equal divide. The ring covers the kitchen and dining so about 50% of the ground floor. There is another cable which I can see alongside the faulty one which routes to the kitchen's oppsoite wall socket. It too is also partly...

Thanks TomH93, The socket has 2 twin and earth cables 6 wires in total. The other end of the cable the socket has again 2 twin and earth cables 6 wires in total. The damage is probably somewhere inbetween under the floor. Let me know if I can add anything further.

Thanks TomH93 too for helping me. Everything is unplugged and as of yesterday all sockets have been removed too. Here is what I've done and found. I removed both live wires from the breaker and both neutral and earth wires. Then removed all the sockets from the walls and removed the sockets...

I am so grateful for the replies. I think I may be over thinking this so have decided today to remove the floor units and ALL sockets. I'll expose all the wires and check eack one at a time. I will then have proper and clear information to post here otherwise I'm affraid of wasting everyones...

Thanks bernardgreen. I was initially checking earth continuity before turning the power back on after cleaning up all the wires. When by accident more than any particular reason I noticed that when I probed the live and neutral the multimeter showed 35.2 ohms when set on 200K I thought it best...

Anyone have any ideas?? Please!

Sorry for the delay... I was sure my fingers were not touching any wires. I measured between the red and black at both sockets. Weird thing is the wires are all disconnected. Red and black readings started at about 35.2 ohms and rising. Red and earth started at 55.0 rising and black and earth...

I connected it up today and the breaker did not trip. I am very worried about those high resistance readings especially as all the six wires were disconnected and yet there was a reading. I can only imagine that some corrosion is to blame. Should I arrange to have this section of cable changed...

All done now BUT to cut a long story very short I was almost ready to test the circuit when I noticed that when my multimeter was set on 200k the ring main in question was reading 35.2 rising to around 60.4. I have no idead what this meant but the other ring main reads 0.0. I knew instantly that...

Many thanks Dave & Bernard, ok, I'll change the metal back box for good measure and refit everything. Fingers crossed it won't trip the breaker again. If it does then I suppose I'll have to get the entire cable changed. If there is anything else I can check or do then please let me know...

Thanks Bernard, Yep, about 3years ago I had a leak in the underground drains which was sorted. The area affected was 15 away under the screeded floor. When I removed the front plate the metal box had small areas of rust covering about 30%. The skirting board came off but was not rotted...

I've cleaned up the earth wire and was wondering how the earth wire shorted with the live. Other than the blue stuff and blackened earth wire there are no other tell tell signs. I am sureish that the pop sound came from behind the socket but can't see any tell tale signs.

Many Thanks Sparkwright. Will clean with wire wool and reassemble. Thanks again

A months back the a breaker on my consumer unit tripped. I flipped the breaker back and approx 20mins later I heard a pop sound from a socket. I removed the faceplate and could see the earth wire was blackened and a fair amount of blue dust around the earth wire at the point where the white...