Search results

Ok, thanks for that and simple enough. My cool dial just says Cold and colder with a graphic thickening line to indicate (clockwise colder) having said that I have checked the temp on coldest and it's getting as low as 5 degrees and fluctuating to 9 after opening. To me this shows the...

It's a frost free freezer but again, after leaving the fridge to recover for 6 hours the temp at best is 9 degrees. Gutted! I can't see ice stiil on the element after 11.5 hours defrost in Summer with a fan blowing into it. And the fact that it hasn't made an iota of difference to the temp is...

OK, but is that something I could do or would have to call an engineer out?

I didn't see any dripping and none of the towels were wet when I pulled them out. It's can't be ice as it was left running with a fan overnight. What doesn't make sense is it was running at 4 degrees not long after switching on but now back at 12 degrees with the door closed a couple of hours...

I have it set to the coldest setting. I read it again and got a reading of 5. Some time later and it was back at 10. I was really hopeful when it reached 4 degrees on first turning on again but it seems to swing rapidly. Perhaps air temp is not the best way of monitoring ?

Ok, the freezer is at -18 which is normal and the empty fridge got to 4 degrees. However, an hour or so later putting a few food items in it went up to 12. 5 mins later it is at 10. There would be def no ice inside now after that long a defrost with fan. his is so frustrating!!!

It's been defrosting overnight for about 11.5 hours with a fan pointing inside the freezer. Both doors open. I have just turned it back on and now hoping that has fixed it.

Ok, I can't see any drip tray at the back and I can't pull off the panel to see if ice is on the evaporator but leaving a fan blowing towards the inside should do it.

We have the electric cool box which hopefully will be better. I have a 2 wheel sack trolley I can get it out with when empty.

It's not practical to pull out as kitchen space is small and floor is wood. Surely just turning it off and leaving it overnight with a fan pointing inside the door will be enough? We don't have any option to put in neighbours, only a electric cool box.

This morning it went down to 5 degrees and later it was 11. This doesn't make sense!

Well, I can't fathom it. After another hour it has risen to 12 degrees on the coldest setting. This is so frustrating as I can't face having to defrost it all again. Such a hassle when I have only a portable electric cool box to fall back on

I just checked the temp gauge in the empty fridge after turning back on for 2 hours and it was at 10 degrees. 15 mins later it was around 6. Then a few mins after that it was 10. Checked the freezer temp after a few mins and at -18 degrees. Just checked the fridge and still 10 after turning...

I am defrosting it now but can only afford an hour as meat stored in spare fridge won't keep over 2 hours (1 hour needed for fridge freezer to get back to cold temp) If a repair is needed it might cost more than the unit itself if Bosch have to be called.

Thanks. I did think about a hairdryer but all the advice online from fridge manufacturers advise against it.

BoschSeries 2 KGN27NLEAG fridge freezer - 2 years old. A couple of days ago I thought I had closed the fridge door properly but an annoying plastic container (I didn't feel any resistance) just kept it unsealed hence the fridge was running at 15 degrees next morning. Having closed the door I...

I did that last time and it was clear. I'll try again tomorrow just incase. Our neighbours had a similar problem (not on our pipeline) as the sewerage was backing up into upstairs shower and yard. manhole was blocked and it turned out to be lumps of cement blocking the pipes.

Ok, after almost 10 months I just smelt it again coming from the drain. Why oh why would this happen again after such a long gap ? :cautious:

Ok, so I managed to lift one with crowbar and get the rest out easily (After doing some tests, I found what I think is a large diamond underneath one of the blocks) I have set them back with some sharp sand and soil mixture, and when I get some mortar I shall point them. My question is, the...

It's not running down the inside as just gone out (sorry the images are not great as just spotted this in the dark, and the shed is in need of de-cluttering.) The base of the shed it stands on is sound and yet above that it has seeped into the inside. The very bottom edge of the cladding is dry...