Search results

Yes on the main supply yhat runs from the meter and a switch on the signal cable that feeds the E7 contactor

Am I correct that when new c u being installed there's only the customers (mine) 80 amp fuse that needs pulling and not the dno supply fuse

Just to add main fuse is zfter the meter this is in addition to dno fuse

1. Existing c u is tight to the ceiling, can new one go in same place. 2. I live in a 2nd floor flat, meter is on ground floor with main 80 amp fuse close by do I need another fuse

Wheels in motion new CU in new year

I'm having new oven an hob, no change to existing supply is involved

The isolators, installed 2008 are approx 200mm from hob and sink, I believe the minimum of 300mm is recommendation only

Oven, wattage will be 5.5kw, maybe that's where the smaller cable runs too just wanted to make sure so the electrician won't quibble, applying diversity tells me it' OK

There two cables running from the c u to cooker/ hob but I can't tell which goes where until the existing hob and cooker are taken out, one at 4mm the other at 6mm will the 4mm cable suffice if it's running to the hob

6.6 kw no mcb on a 30 amp fuse carrier c u

Looks like a 4mm existing cable is installed, will this suffice for new 32amp ceramic hob. The cable is approx 4m length 1.2m embedded in the wall, cable is pvc sheated

Do you have signal control from the meter, what does consumer unit look like, photo please

I have a memera 2000 consumer unit with a aa203 contactor wich is switched via signal cable that comes from the smart meter into a 5 amp fuse carrier which then connects to the contactor. If the contactor fails, no suspicion it will soon, is an up to date alternative available for the mem 2000...