Search results

Having replaced the mid position valve the operation of the boiler seemed normal, however it seems to be up to its old tricks again, not switching off. If I remove the programmer it stops. Could it be that leaving the programmer without power for a few months reset the problem which now seems to...

So does this mean you suspect the programmer? as we speak it seems to be behaving, it is currently not running while mains power is on and program says off.

Hi all, have a problem with my heating system not switching off, Trianco oil boiler 20/25, acl lifestyle control center, mid port valve. I have replaced the hot water tank stat, no fix, then replaced the mid port valve, initially all worked fin until this morning when I switched the system off...

Cheers mandate, oilman on my burner there is a philips screw which increses the size of the air aperture,(its quite an old boiler) I have tried increasing this but with little effect,I'm puzzled by the fact that after the new motor was fitted there was no smell for about 3 months, only recently...

Little glass thing definately us, but I repeat no lock outs since I cleaned the burner/jet etc. I would appreciate any suggesttion as to what causes a boiler to go smelly (exhaust wise), is the air/fuel mixture only controlled on the air side of things, or can the amount of fuel delivered be...

Don't trust the guy who fitted the motor, he made a right dogs breakfast of it. It's definately an exhaust fume smell, seems like it might be running rich, do they smell if they run lean? Little glass thing is definately fkd but no lockouts since I cleaned the burner so it cant' work when in...

Hi all, had a new motor and a service on my Trianco redfre 20/25 about 3-4 months ago. Worked fine for a while then kept on getting lock outs, and latterly became very smelly, but no black smoke. Striped Slectos burner and gave it a thorough clean, reassembled. No lock outs now, but still...