Search results

Pretty sure the motor is in the roof lining where the cranked handle would be. the front you might see though the interior light. have a look in the handbook as there is an emergency closure point. had a look page 41/42...

is this a Victorian terrace.? Not sure if you are kent but upto last week mine each side was supported by 2 8x3" wooden beam from outside wall to internal wall then a 5mm steel plate over them to the stack. between the stack was a wood support

steering goes stiff as the ecu in the steering stops the motor drawing power when voltage drops to lol, The joys of electric based steering

snap thats what i was told fit with silver foil also. I was told this, ie, 50mm gap, then the insulation, then foil, then 50mm gap then 9mm plaster board, the a 3mm skim. All this is the cold side of the roof!!

agreed opcom. Used to program keys, abs testing and diag

wow i had to put in 90mm in mine with a 50mm gap. Spend the money and go up if you can space wise

i seem to recall a cubic meter in the ground is about 1500kg but out the ground will be 2 cubic meters in a skip

And what steel is it? I paid £200 for 10mtrs for my loft but this was 150mmx10mm plate a company called Hy-ten

Thought Id do this as a new thread Usual thing need the space could not afford to move so here we go Basically i realised that i should be able to do it myself saving ££, Took a recommendation of a structural engineer whom designed the loft with no steel work only for the Chimney support...

No update but slowly progressing no external help as yet Stairs made Build reg lady seemed happy at stairs and front floor stage. just need to put tread on as I did not want to damage them New view from rota window shame its the store room outside all done from the inside Stack...

If you have it I'd use box or angle fixed to the alcove, just drill through and bolt to the wall. Fit wood on top and then finish the front off with a trim piece so it covers the frame

I have managed to get an allen key when desperate. But I the brought a set a used in so many places