Search results

Did you use the compression nuts supplied with the shower valve, the nuts supplied with these showers are a longer patten nut.

When was it last serviced

You need to be registered to work on unvented (G3) Unvented cylinders should be checked and serviced every year to maintain the 25year guarantee. I wouldn't use DS3 in an unvented cylinder.

Have you checked the shower hose is not twisted

This is the one you need to fit https://www.showerdoc.com/stuart-turner-monsoon-universal-3-0-bar-twin-shower-pump-46410

You can buy 3m straight lengths

Very unlikely to be a boiler fault

The unit will most probably need replacing the unit will need to be drained and locate where the leak is. These units are guaranteed for 25 years if you contact the manufacturers they will inspect it and replace it free off charge. They will need a copy of the service record and bench mark...

I've fitted a few Baxi's nice compact boilers rear flue ideal to fit in a kitchen cupboard can't comment on the Vailliant.

I use the bpec one think it's about £45.00 can't comment on the viper one http://bpec.org.uk/bpec-domestic-gas-safety-manual/

Dead legs on pipework can cause this if it was a combi conversion

How is hot water heated

Don't turn the hot tap on then

I would be looking for a blockage most likely heat exchanger

How did you flush the system with a flushing machine or chemicals and a hot flush

How much do you expect to pay for the service

You've already breached 26 9 as you have replaced a pcb in the past Did you complete gas checks after you replaced it I bet the boilers never been seviced by a gsr engineer

Gas Regulation 26 9

All the fittings and fixings you require are supplied they use the same fixings as most towel rails the only items not supplied are radiator valves. Your installer will be able to fit it don't panic.

I think you need a plumber who is fitting the bathroom if you are I think you will need a lot of help lol