Search results

not being funny but you can pour as much chemical as you like down there if the plumbing is not right. then its not going to drain.... try to see what the fall is like on the pipework ive seen baths showers where the pipework rises many times...

a sealed system should very very rarely need topping up (ie) never think about it its a sealed system water cannot escape! (unless there is a problem) the external filling loop has a non return valve on it... also the loop on the boiler has a non return on it.... yes loops should be removed...

1 yes and no you can use both 2 no idea (other one faulty? 3 replace what? guessing the filling loop (compression caps or soldered) 4 if the other filling loop is working you would have to drain the system to remove the external filling loop then just cap both sides. also no its not ok to...

of course they carry all parts most of the parts are plastic ffs i find worcester tech and staff good but ffs why so much plastic. pin holes here and there exchanger with a bigger six pack then me ( :oops: )

Thanks burnerman well it wasnt the servo it was the spring in the back drum again . not all bad it only failed on 3 3 tyres both front brakes and the back spring kit? :oops: to be honest i felt like a **** 3 new tyre and new brake god you can tell the differents in driving the...

just took this to mot station i new it had problems with the handbrake but they just told me the brake pedel goes stright to the floor and they think the brake servo needs replacing but have to ask another mechinic does anyone no what type of figure im looking at here. and does the above...

Don't need spot or tripe nothing These are the faults I've had simple I don't come on this site to argue I come to learn and share with other engineers. So you can LOL as much as you like Why would I slag off a manafactor for no reason what so ever ? Unless I've had problems! I slag off...

Well you should belive it 2 of them divertor was passing 1 of them wasn't sparking 2 Can't remember And the one I put in a week ago won't ramp up on ch above 55oC Tech told me there's a blockage on the last one well the kamco was on from 9am to 1 pm rad hammer magnacleanse and kamco fx2...

Well good luck with that The last 2 years of installing nothing but Valliant 6 have come out of the box faulty. So if a non reg guy installed it good luck with you warranty I used to install nothing but valliant I will not be installing one again!

tony gave you advise