Search results

Very common on sump to main heat exchanger also check no condense back up from condense pipe. Just call Ideal and they will sort it out

If your not happy pay baxi 275 to sort it

Quite common for modulating pumps to be noisy , defo on Vaillant, had a few Ideal logics. It be under warranty so get them out to replace, in between time video the noise and so Ideal engineer Hope this helps

Get powder flush in there sort it for you

Vaillant/glowworm had flue seal issues, changed design recently but very common hope this helps

It be the hose

Depends on pressure of mains water /flow rates/expectations etc, if you can get a cylinder with system boiler atleast your have a back up of hw via immersion heater. Good luck

Go to boxt there sort you out

Just get a new boiler, this model is old and your waste time and money,

*** This site does not support DIY gas and posts giving advice on gas work, or encouraging or suggesting it, may be deleted. However, posts are not routinely monitored, so no work should be done as a result of seeing anything on the site. Read more...

*** This site does not support DIY gas and posts giving advice on gas work, or encouraging or suggesting it, may be deleted. However, posts are not routinely monitored, so no work should be done as a result of seeing anything on the site. Read more...

Change divertor as bypass rattling very common need a gas safe engineer though, get a brass divertor as more robust then the plastic ones. Hope this helps

Get a plumber in stop being tight :)

Seems likely overheating , you can either call a local engineer out or call Worcester for a fixed rice repair,sadly nothing a diy or customer could fix:( to be fair a lot of the time unless your in front of boiler it’s difficult to diagnose. Hope this helps good luck

Hey I’m only going on feedback/experience in my area. Just giving my opinion, not slating any manufacturers at all. I’m sure intergas are very good and that’s what we as engineers expect

It’s the aftercare if the boiler fails, I can only go off feedback and experience baxi/Ideal usually 48hrs, Vaillant/glowworm 48/72hrs Worcester 24hrs not sure on intergas as for ferroli hmmm. What ever boiler you have will need a call out from manufacture and certain manufacturers engineers...

I would expect 45-60mins for boiler and depending on manufacture instructions for hob 30mins max. It that time for both he could confirm any questions you have on performance/how to adjust heating controls etc Hope this helps

Sorry typo error should of been everyone loved the broags until they started to fail...

Installer hasn’t done anything wrong, this product hasn’t been tested in uk, just put out straight away to see how it performs/fails.does very well it terms of erp rating/efficiency etc and installers love them as they tick every box.... but I don’t think there have the love in the future when...

Good luck with them Vaillant iq takes 20mins to go through combustion checks and are very sensitive with doing this, there is a co sensor that is very sensitive and Vaillant are changing a fair few of these at the moment, if your working pressure was not 17mbar or the engineer didn’t go through...