Search results

The valves at the manifold are both closed

You can't glue polypropylene. Is that elbow glued on or just pushed on? Your sink bowl base looks quite close to that elbow. I would start by assembling the sink trap kit that you have shown and then seeing height difference from trap outlet to elbow. You look to have enough pipe behind the...

If it is clicking at 40 C then it suggests that stat is OK so more likely the heater element breaking down when hot.

I am confused. Your drawing shows trays in right hand corner of both rooms yet shower waste is in left hand corner? Your swept tees appear to be facing the wrong way

Put a branch on the rainwater and discharge the condense into it. This way if your rainwater blocks it will not back up and flood the boiler.

Drain offs just to the right of ch isolation valves

The EU published what it thought was a redacted version of the AstraZeneca contract. It's not. Open it in Adobe Reader and then open the bookmarks tab on the left. The redacted headings are there in plain text.

Possibly a failed durgo? Do you have some boxing in the room in question?

Hello Mario. I would very much appreciate copies of these. Cheers [email protected]

I had a series of poor experiences with my gun, great for a few uses then a nightmare. After yet another strip down & clean I checked the dates on the cans & all quite well out of date. Not been a problem since.

This is the Ideal Isar but same principle

The little black cap on the top of boiler will be sampling point

Can't see it on your photo but is there a screw inside the hole in the hexagon part? Often requires allen key but sometimes slotted screwdriver. Anti-clockwise to open looking down on it.

Or whatever is meant to switch it.

If you manually open the valve on top of the cylinder using the little lever on the end, now put heating on, the 2 pipes on top of the cylinder should now get hot & your cylinder begin to heat up. This should allow you to get hot water upstairs for the time being. What do your 2 room thermostats...

If you are happy to wait 11 days to resolve this then no worries but if you wish to get some hot water upstairs in the meantime, you presumably have a programmer of some sort with hot water & heating settings. Put the hot water to constant and heating off. What does boiler do now?

It sounds as if your combi feeds the kitchen tap and other hot outlets are fed by a cylinder. Is this correct?

Looks like one of those silica dosing things

Or one of these with ply packers as required https://www.screwfix.com/p/rothley-round-furniture-leg-silver-150mm/18211

Although it should be a sealed system, it is possible that this has ben left as tank fed. This would explain why safety valve is capped although having shut off valves on boiler then it really should still have a safety outlet. The "fill point" below boiler may in fact be a drain off point. Need...