Search results

Is there a caulk which stays white Not silicone sealant I want to put some in the gap where the bannister meets the wall see pic

Need a small quantity of mortar for some repair work on the house. Anyone had any experience with it? Looking for one to match below as close as

Hi, All of our skirtings and windowsill are painted with Dulux High Gloss All of the areas covered by photos, ornaments etc have gone yellow. 1. Will the colour return to normal? 2. Are there any products that don’t turn yellow?

Not sure that will work I’ll try wood filler again today, as it worked on a few other holes yday, just this one had too many to screw back into. if not I’ll get someone to replace that section

Ground under the joist, it’s suspended of the floor a couple of feet

Partition like so

Yes Hollow The fittings are placed between two boards with a gap in between for the fastener linked above. it’s a small opening to get anything in like a dowel or toothpicks as I can’t trim them with the space available

There one size fits all, they aren’t standard screws either they have a tapered edge

Similar system to this yes

Drill on screw drive mode And been hand screwing the loose one after trying filler today.

The fastener screws are a one size fits all. There just the right size to fit on the fastener

Joists are about 25-30 mm from the top of the board.

These are the fasteners https://www.dinodecking.co.uk/products/6mm-hidden-fasteners-100-bag/

It’s using decking fasteners The T shape ones with the screw through, it’s the same on that keeps coming loose. Decking is a few months old, I’ve re screwed it 4 times now so no holes on the joist left. Tried wood filler etc but can’t get it deep enough into the whole. Tried a dowel but with...

I need to re screw the decking fastener

Hi, I’ve got a joist which has taken too many screw holes now. Whats the best way to fill them without taking the board off? Or is it a case of replace the part of the joist?

Is it his first day on the job or something?

This is what I did Coated with a clear wood preserver (Rustins) Mould still appearing I sanded it all down added two coats of wood preserver (Cuprinol) Mould seems to be worse now after all the rain. Not sure if it’s just on the surface and the preserver is doing it’s job. So have wiped...

Yeah it dries really well. Just annoying if you have small touch ups to do that you can’t after a few hours

Yeah I did two coats on my railings but need to do some touch ups now that I didn’t notice when I finished.