Search results

I think the interior surround is pretty securely nailed/glued, and would be tricky to remove without causing a bit of a mess. I'll pop over and stick a decent bead of the sealant you recommended above the trim. I'm still a bit confused/concerned about how water is running down the wall though.

Help. A friend sent me a couple of videos. I don't appear to be able to attach them so I've attached screenshots. One shows water dripping through the internal wooden window surround. The other seems to show water running down the external wall under the roof ridge, onto the upvc window trim. I...

I'm looking for advice on products to repair a hole in sandstone, including a colour match. I've attached a photo of the damage (courtesy of Openreach).

Sorry. Wrong terminology. The shelf is 900mm long, 225mm wide and 35mm deep, therfore it sticks out 225mm from the wall.

I'm looking for recommendations for long fixings of 100mm plus. I'm trying to put up 900mm wide scaffold shelves using brackets same as ones in photo. Have done successfully around flat until trying on a external wall next to deep window bay. I went in 80mm before hitting anything remotely...

Is it easy to fit? I have zero car repair skills.

I've an 11 plate Aygo. The indicator lamp and dashboard light don't work when the lever is pressed to indicate left. They both work if the lever is partially moved and held, but not when fully pressed. Everything is fine on the right side. I don't know if this is relevant, but the first time I...

Job done using Floplast universal adaptor. Thanks.

Thanks again for your help. Really appreciated (y)

Thanks. I definitely need something with a solid fit into the pipe. It's probably difficult to see in the photos, but the clay pipe appears to have a broader rim that won't allow for something to fit over it.

Does the plastic adaptor just push into the clay pipe without anything else to hold it in place? I wondered if it needs to be secured with a sealant.

I'm looking for suggestions for neatly connecting a 68mm plastic rainwater downpipe into a 100mm clay underground drainage pipe, ideally so it's easily accessible for rodding. The 68mm pipe is currently just sitting inside the 100mm pipe with a cement cover. See attached photos. It's hard to see...

The four largest radiators on my system are always cooler at the bottom. Not cold though. There's just a noticeable difference in temperature when touched. I've not got any device to measure the difference. These are 1600x600 double panels in the hall and downstairs rooms. All of the smaller...

This sounds like it's grown from one dodgy light wiring to a full blown investigation and potential consumer box replacement, plus whatever else is found to be non-compliant.

Yes. I disconnected the neutral feed.

It's been gas central heating since purchased nearly 15 years ago

OK will do

Define normal please.

What?

OK thanks for your help. Bit worrying though.