Search results

Yeah. I did a clean start, so it must be…. But, when I put D 2222 nothing happens. If I input D 1111 it gives. E two options, set alarm and set with something else… will try and check exact message. It seems I can’t access the manager menu whilst tamper faults and siren fault are still recorded?

right. the stumbling block I have now, to set up the home control app on the phone I need a user code. I did clean start the panel so I guess user 001 is 1234 by default. Because my desk test set up has tampers and faults, no battery, case off etc, I don't seem to be able to access the manager...

after leaving it a "while". then going back in with the system ID and using capital O instead of 0, which I'm sure I tried last time, it now has let me link to my account...

Hi Again. So bench set it all up. Clean started. Followed comms set up. It says it is polling. But when I put in the system id it won't link, so presume it is registered already. Although is it only the numbers 1 and 0 that are not numeric in the system id? A response message that actually...

Good question. Hopefully not. If it is I'd have a right to ask to delink or return. But maybe bench test it with absolute min ser up first?

Hello All, Following earlier advice, I've acquired a used v10 to update my 9.1 installed version, as well as a lan comms card.. So I'm wondering how much difficulty and time it takes to set one up (for an unexperienced amateur).. I'm generally good with config and ok with wiring not done much...

Ok, yes thanks. I guess it would only be small data messages to send set, unset report on status...

Hi, Back again. Thanks for the previous help. Have my 2017 v9.10ar system working now. Thank you. If I still want to get app control and setting / unset etc via app. I need either a 46 v10 or a 76 per earlier replies. As far as the IP module, I've discounted wifi, as I'd rather run ethernet...

Hi, I've read a few helpful posts on here regarding these two issues. A posting in 2024, was regarding a sensible upgrade path to a Euro version10 by swapping the PCB over and adding a digi wifi model for app use of arming / disarming / activation reports etc? Only problem is, now the Euro 46...

I agree, it's not their recommended setting - they "mitsubishi" could not explain the operation, or probably, more correctly refused to acknowledge it, even when the operation was explained to be nonsensical by 1) the installing engineer 2) the visiting mitsubishi warranty engineer and 3) the...

I forgot I posted this! Yes. Sort of. Mitsubishi were completely unhelpful in explaining anything in terms of the operation anomaly. But, if the owners change to a timed setting, so that the dhw is not set to heat whilst they are in the showering window, for example 7am to 8am, the full tank can...

Oh the steering “wheel” control module. Mounted behind the steering wheel for most vw Audi cars. bit of removal to get to it. EDIT. maybe not on this one. Is this it. Doesn’t look like most of the plastic column controllers I’ve seen behind the wheel. this is left hand drive obviously.

It'll be part of the rack, surely?

Great result if it is proven just to be the drip detail on the top of parapet. The existence of the other descriptions on the roof don't bode that well though in my book. I don't think I'd be happy with just gluing on some pvc drip strips as the fix either. The membrane over the top will need...

I don't work in roofing but I had a problem with my own flat roof on new extension. Took nearly 2 years to resolve. I had to engage a retired friend who used to own a roofing merchant and a repair refurbishment division. Yeah, it's hard with trades especially when they don't see something...

Correct I don't think that is the underlying fault. You could try it. It is low cost. Not sure how they will be attaching that to the current flexible roof material up and over the copings. Hopefully some sealant and not mechanical fixing. Looks like the roof may be epdm. But is that damp...

The last 2 posters are onto something when i look at this. The common threads are water is pooling on the roof and drainage is poor - only one small outlet opposite end. Fall "may" be inadequate too. The damp appears about level with the base level of the main flat roof. Ignore the parapet...

Our journey started in 2015 and crossed 2016, so wait times may well not be reflective of now. From recollection, the planning inspectorate give current indicative appeal wait times on their website. In our case, from having our 3rd application declined, it was about 6 months for the...

@frank999 Before and after photo. I'll delete after a day or two.

@frank999 Those plans are a long road to something that is quite bizarre with the gaps in rear elevation! What a pain. Like a part finished jenga game.. This is what we had approved on appeal. (Declined by council). False pitch permitier hipped roof, flat roof inside. 4.85M. Original PN was...