Search results

I think Triton was the brand I was going to avoid (but I'm being unfair), due to the thermal cutout sensor tripping when it shouldn't. 75°C and avoid Aqualease Anyway, I want this shower for an E7 flat. I think that is the right thing to do ?

The TV I purchased in 2012, while it didn't have a massive scart connector, as least had a short lead so I could plug one in. My HDD video recorder allows me to skip adverts at the press of a button, so I wouldn't be without it. Also like the series link and automatic title search word...

Nah. No way doing that.

https://www.diy.com/departments/time-white-heat-resistant-3-core-flexible-cable-2-5mm-x-5m/188974_BQ.prd not sure I would use this for a cooker!: https://www.diy.com/departments/time-white-heat-resistant-3-core-flexible-cable-1-5mm-x-1m/5055268786956_BQ.prd

Damm. Looks like B&Q stopped selling it. Maybe no one was buying it!!!! Google it and see if there is a supplier near you. (should someone else see this thread in the future)

Just goto B&Q to get your heat resistant flex (HO5BB-F or HO3V2V2-F) must be cheaper! £19 for loads (not for collection though) https://www.diy.com/departments/time-white-heat-resistant-3-core-flexible-cable-2-5mm-x-5m/188974_BQ.prd https://www.diynot.com/diy/threads/hob-wiring.652400/

I was hoping to purchase a Panasonic TV in BF sales. Before purchasing, I thought I just best check it has a SCART port for use with my beloved HDD video recorder, and it hasn't! Are they still making TV's with SCART? Are adaptors cables available? Any recommendations please ?

And where do we stand on the fact that the 1.5mm flex is only 1 meter long, in free air. Does that still mean it needs a 16A MCB John? Also consider that the conductors are doubled up in this case. (only at one end though). 1 driving 2 'hot plates' and 1 driving the other pair. Yes, if you get...

Now it’s done, leave it alone. Common for t&e to be used I think bnq sell the flex

I’m aware of one brand to avoid. Need to look it up.

Can ppl recommend shower (inbuilt heater) brands to use and those to avoid in terms of reliability please. I think I want one to run off 6mm Thanks

You don’t need to crimp them. It’s usually how it’s done when it leaves the factory though. (So maybe why it’s in the manual )

OP. I know it sounds crazy! But just connect it up. It’s common for hobs to come with 5 or 6 core flex. As said, made for Euro spec, but can also be used in UK.

bet the Scottish wish their winters got near 50°C

Yes. That is probably the proper way. I note there are some spare holes in the bottom by the white wires. You maybe able to push wires in there (but not remove them in a hurry ) Some /most would call that a bodge. I would call it more reliable as there are less joints.

The easy way is to find the last light with only 1 cable and run from that

When I previously asked, it wasn't a problem. Just need to ensure the cpc is thick enough to cope with the biggest cable/circuit

You maybe able to use the rose as a junction rather than buy expensive wago

If it is, I think we are only talking about 10 years.

I'm not sure that 6mm is tinned. Anyway, it's metric cable, and green/yellow sleeve. So sometime after 1974 The fact is has 30ma, points to 80's