Search results

Yup that's plumbers vans I'm expecting to find a japanese soldier one day.Bob

One piece of advice I would give is to fit 1 electric shower as the boiler is bound to turn it's toes up every so on so at least people can keep clean.Bob

Put penny washers at the bottom tighten up they'll be fine

Nice one they can be sods to get out sometimes glad you did it.Bob

Usually goodie I was you the new one I'd smear the washer with waterproof grease see how it goes Bob

Try changing the solenoid coil it sounds like it's starting to play up also get the pump pressure checked.Bob

Vgood point looks snood to me.Bob

Don't rush into a softener try an electrolytic filter on the incoming pipe it seems you've got soft limescale so the filter may cope.I've had a bit of success with these in the past.Bob

Peggler for me every time.Bob

Yup grab the nut with mole grips wriggle from side to side it'll snap off.Bob

It's a good job no one was stood at that end doesn't bear thinking about.Bob

Maybe the circulating pump.Bob

I had a Shout when I was a retained fireman an aga + numty flame out tried to relight and boooom it blew one end off and put him in hospital for a fortnight and the damage was to be seen to be believed.Bob

Co springs to mind.Bob

Haaaaaaaaa

Wow lucky you didn't get a massive pop or a bang fumes can be lethal in these things I'd put the wicks in but think shouldn't you get it done properly by a guy who's got the right gear to check it's not chucking out carbon monoxide there's a lot of people who've done that and paid the ultimate...

What boiler is it on if it's the Wooster heatslave mk1 yes but can't use the panel reset you have to press the buner button but on the fire bird there is a heat demand White wire so it has to be a firebird box.Bob

It's not called a concealed unit for nothing.Bob

Good luck.Bob

I think I'd take the oil line off each end and blow it through hook it up turn on the oil just to make sure all the line is clean then check electrodes cables and transformer.Bob