Search results

  1. O

    Water softener

    Harvey for me every time.Bob
  2. O

    Camray boulter 5

    Ahhh a camray a proper boiler.Bob
  3. O

    Domestic oil additive

    Excocet does make oil pumps last longer as the oil companies have taken some of the sulpher out of the oil as you all know sulpher is a natural lubricant and with the reduced amount the lubricity needs to be topped up so Exocet is ok it's £20 a bottle but a big bottle does 4 tanks so not so bad.Bob
  4. O

    New oil combi recommendations

    Actually I have had a warm flow combi for five years now and not a bit of trouble and I'm a warranty engineer for them but this boiler is a damm site better than the woooster it replaced.Bob
  5. O

    New oil combi recommendations

    Hear hear with you on that Terry.Bob
  6. O

    New oil combi recommendations

    Stay away from a blue flame burner they are not developed enough and give problems plus a photo cell is very expensive the lo nox yellow flame burners are ok.Crikey Terry I reckon you must be nearly as old as me to remember the pathfinder and mr boulter was a very clever man.oh the mec3 burners...
  7. O

    New oil combi recommendations

    By the way Terry my friend downwards firing burners developed by boulter boilers before being taken over by buderious worked very well on some old old boilers.Bob
  8. O

    New oil combi recommendations

    By the way woooooster do use contractors.Bob
  9. O

    Oil CH boiler - air in the supply pipe

    If too much air goes through the pump it's like running dry and you'll goose the pump.Bob
  10. O

    Bentone Burner - Oil Pump Replacement

    Under the pump theres two grub screws undo them and the delivery tube plus pull out the coil plug and it will pull off there is a coupling make sure it's in properly and in line when re fitting pump.Bob
  11. O

    New oil combi recommendations

    Pity you didn't just want a heat only I'd have said houndsfield every time .Bob
  12. O

    New oil combi recommendations

    Grant every time if you fit a woooooooster you won't be happy.Bob
  13. O

    Oil CH boiler - air in the supply pipe

    Get a qualified engineer in and stop messing with it you've a chance to make it worse.Bob
  14. O

    Riello Burner - Fixing air shutter into position

    I don't mess about I take off the cylinder and fit a new pump safer than folding pipes back on themselves and simpler.Bob ps Terry my friend you are dead right.
  15. O

    Bentone Burner - Sterling 40 not firing

    Very true my friend probably better to try on the floor To get better view.Bob
  16. O

    Oil boiler locked out... can't get it working

    If you've water in line take out filters de frost line blow through with air then reconnect and try good case for checking tank and line on a regular basis.Bob
  17. O

    Bentone Burner - Sterling 40 not firing

    If oil is spraying the blast tube will be wet take out the burner turn it on you should see sparks straight away if so switch off if you have enough room let it fire up on the floor you'll see if the flame is sop sided if so swop nozzle if no fuel check pump and solenoid coil if no spark...
Back
Top