Search results

Are you fitting panels to the walls rather than tiles? Panels usually use corner trims that the panels slot into. Walls will need to be pretty square. I used these trims for the panel to tray joint Neat finish and a good seal. Lots of options to ensure a good seal

Triumph Acclaim was the same as the Honda Ballade

Difficult one. Could be a good investment if the rest of the car is OK. Have you had it long? Have you had much work done to it? Colleague has a 2011 Passat diesel with well over 200K. Has spent a fair bit over the last few years on worn items, suspension, bushes. What would you replace it with?

Are the rads different widths? You can get longer rad tails to fit a narrower rad. DIY and have replaced some older rads with new. Floorboards up and modified the pipework with compression joints. A fair bit of time but low cost.

The hot air from the drying process is recycled back into the machine. The room we have the drier in used to get a lot warmer with a condenser drier than it does with a heat pump.

Replacement hinges https://www.amazon.co.uk/DBTLAP-Acer-Travelmate-7520-7520G/dp/B079JGBB78 Often laptops with stiff hinges rip the threaded inserts out of the lid so there will be nothing to screw the hinges to. If this is the case, you may be able to glue or araldite the inserts back in. I...

Any good? https://livingconcrete.co.uk/product/corset-concrete-tiles/ Do you want to extend or replace some?

To be fair to you, 102 is also the type of numbering used for caps. Normally small ceramics/poly. 240V on the Hub so potentially a little risky. I have had the odd mains and undischarged capacitor tickle over the years

Have a google image search for under sink drawer Most look similar. Some have a bit of storage across the front. Not all sinks are the same size and shape. Not practical for B&Q, etc to have different sink drawers for each type of sink. Where do you think storage could be added that wont...

Could CA be Canada? There appears to be some other markings on your last pic by your thumb. This looks quite similar https://www.ogscanada.ca/tilt-turn-window-door-handle-euro-style-white/

:giggle:

Need a proper chopper :)

I have just paid around £130/SQM in Manchester for brindle block. Did include some hedge removal, new step and tarmac work on the footpath. Have you researched into the two companies? Lot of dodgy driveway firms.

VARILIGHT V-PRO are usually recommended for dimming LEDs and work from 0W Have one running some downlights Link is for white but other finishes available from Screwfix and elsewhere https://www.screwfix.com/p/varilight-v-pro-1-gang-2-way-led-dimmer-switch-white/94816

I bought a kit for DIY. Not too bad price wise and useful to have. https://www.screwfix.com/p/wago-basic-installer-connector-set-75-pack/48808

Yes In a pudding bowl. Make 4 at a time from 1L milk Night before 30-40g of oats 1-2 TBSP chia seeds 250ml of Almond milk 1 TBSP Maple Syrup Good stir and push any seeds stuck to the side of the bowl into the liquid. Into the fridge. Ready by the morning. Good for a few days Sometime have it...

Just missing the pastry and custard :) We quite often have overnight oats with chia seeds in almond milk with some frozen fruit.

DIYer Ceiling rose wiring seems to confuse a lot of people. If you understand what does what it is pretty simple. A before photo is always a good idea :) The connections should be in a junction box. Can you get access from above? What does the new light look like? Would it hide the hole...

Have had this in my 1930s. Damp on breasts upstairs and down. Lots of work on the chimney stack that never solved it in the 20 odd years we have been here. Stack now removed to below roof level and slated over. Stained plaster removed from breasts and redone. Seems to have sorted it finally.

They are money making businesses. Not sure about cults. (All hail the great overlord Syn). It is relatively simple to follow and track to keep within recommended calories and portion control. You could do this yourself with some work.