Search results

Alcohol has affected their tiny brains.

What's the reason for number plates G* *** ? Is it a radio call sign?

I saw a plate where they'd drilled 2 holes below a "4" to make it read like an "A". I wish the ANPR operators would target people with illegal plates.

Chap over the road put some in his C4 Cactus and reckons it goes like a rocket!!! However he does come out with some rubbish. I've not seen any tests on FTC and would guess it's about as much use as Carbonflo etc back in the day.

Yes, the proper scanner tool retracts and resets the handbrake actuators but you're supposed to be able to manage without. I watched a video on YouTube but it left me with doubts.

Lateish Volvo V70 but same system as Mondeo/Galaxy I believe. Has anyone done this without special tool to reset handbrake actuator? Apparently 2 ways. Either apply 12v to the actuator terminals - one way handbrake retracts, other it engages. Other way is to unbolt actuator from caliper and use...

You're putting a 2 core flex into a 3 pin plug? I can't see you've got anything to tape up or tuck out of the way.

Pimlico Plumbers have a lot of plates like that.

I find it hard to believe a man of your intelligence can't get Radio 2 in a Ford Fiesta.....

They put a measured amount of oil (PAG oil) into the system when refilling so the machine has to remove all the old contents. I think you get a readout of how much was in the system so you can tell if it's healthy. The cans only inject a mixture of gas and oil. Nothing is extracted. They kept...

KenGMac is our insurance expert but I was in the industry. I'm not aware of any exclusions for DIY work but I'll have a look at my policy.

That's all part of a professional regas. Not if you go to Halfords where they use DIY cans, I believe. I expect there's a French equivalent of Halfords.

Angle grinder then!

Should I have noticed you live in a MASSIVE house earlier?

I hate plates like B16 NYK, anything B16 or BO55. I did see C11NTY the other day!

Use new O rings.

Amazing how when you put your car in for service the main agents never tick the corrosion inspection section.

Leave it alone and let the engineer see the full extent of the problem, not try to hide it from him.

Clearing the stones out of the slots in the grid may have helped but I'd extend the pipes and cut a slot out of the grid.

But at least we can now be aware he lives in a massive house!