Search results

That pushfit elbow tells me there's been an issue before! Blocked feed from f&e. Magnetite. Get it cleared out. Either you or a decent plumber. Could try a gallo gun if you're up to it, but I'd be poking something up and down the pipe if it's accessible.

Well it could fook your pacemaker up! So don't use a strong magnet if you have one fitted! ;)

Or look to see if you have an air separator at this junction!

Geberit may have discontinued items but IME they have replacements that will fit. Also IME, not worth changing washers etc, just get new valves, but then again, I haven't the time to try it and see... Customers want it fixed ASAP and most economical way.

CT1 snag list eliminator. https://amzn.eu/d/bHwUmJZ

This ^^^

It's the rad that needs to have baffle on flow. Nothing to do with trv.

:rolleyes:

Well, I'm not there, nor are you. So, he's up the creek then eh?

With 3.4 bar incoming mains you need a PRV and a shock arrestor as most/if not all combi MI's state. And benchmarks.

For the cost and the headache it could remove... I'd try it.

On a rental, I guess they were fed up with guests leaving it on and draining the lpg?

Management.

Put a reducing valve in and maybe a shock arrestor.

You could try a shock arrestor. Might not solve it but worth a try.

Money saving device. So you get to be uncomfortable.

+1 Rads would have been teed in anywhere during split into 2 flats probably!

They are. Mass produced nowadays.

Heat only cost more than combis. You won't have the backup of an immersion if going for a combi and your mains flow rate needs to be decent.