Could be the coil on the solenoid get the engineer to fit a seal not just talk about it also make sure the electrodes aren't in front of the photocell but round the side.Bob
Yes Terry that's the one what a belter it was that's why I liked the wooooster it remind me of them they and other boulters were first rate and so are houndsfield boilers.Bob
Looks like plaster take the top off and have a look round does the flue go into a chimney,or is the back wall plaster which is loose the first step is always take a good look.Bob
I had a boulter boiler which was nearly 50 years old in my old house which was my dads before he died he had it new and when inhibitor came out he used it every three years and flushed it every five years and filled it with a strong mix of inhibitor when I took the old boiler out I put a...
It's a safety function I'd leave it if I was you if the boilers ok the flow is ment to be 75-80 c and that would give a return of around 50c which will be fine I'm a warranty engineer fior warmflow have been for years and that's how I set them with no probs. Check the circulating pump make sure...
Repressurise the boiler then undo the bottom screw on the bottom of the oil pump wait till the bubbles stop then tighten the screw then try to start by pressing the reset button.Bob
We haven't got the knowhow yet to get the best out of these so called wonder machines and so the running costs are sky high they are unreliable break down and don't produce the power they are meant to if they are why are people taking them out.Bob