Search results

You always need support i was told You must have more below the roof line than above

I am doing one diy loft currently I'd stay standard. 762mm or 30" wide as this is off the shelf narrowest the next size up is 838mm or 33"

http://www.planningportal.gov.uk/buildingregulations/approveddocuments/partk/approved All the info required

They are LOL One of them is on my scariest drives Visa Gt with the BX Gti lump in Most of that can be left out ( that what vaux "may" follow in theory) The ford description is ever worse aimed really low on the skill set level

Wobble under braking could be track rods etc something I've had

Vaux test spec off TIS2000 is 13.7v to 14.v at idle then the same with everything on at 2000rpm, Measuring voltage at B+ on Alternator with a clamp meter. Long one

I have a PS3 for gaming Blueray and free online gaming. I believe it to be better but even though the PS3 is better on paper in real life i find not much between them gaming. However if my lad wanted one it would probably be a Xbox :o first as all his mates have one although i would try to...

I had the option of deleting mine but choose to keep it as it must be there for a reason???? my idle was lump due to its failure now smooth again, and having seen a few aux drive pulleys they have separate pieces inner and out with a rubber insert I did think along the same line as...

yes a tap with a hammer does work sometimes but on the Cdti engine give up lol. So tight down there it is the rear of the block on the passenger side. to even get to it you need to at least get a wheel on the curb

first try to bump it Not a bad job to remove believe its 4 bolt in total. I took mine to a local place that tested it and confirmed it Make sure the power is getting to it first

Just paid £140 labour for all three generally but this was 4.2 hrs labour looking at about 6.35hr hours labour to the book this is

just had the three done on my meriva Symptoms where noise as you described about 18months ago (about 30000miles) i then struggled to change gear above 3000rpm for the last 2 mont then in the space of 50miles I had no clutch peddle the mechanic said the dual mass went first then took out the...

Just one of them make sure as they can suffer don't want the wasted money's on the cam chain. the chain adjuster is not adjustable just a change

do the lot in one go price wise as it it in bits. So not a great deal of extra cost labour wise. Are you sure it is not tappets whats the mileage.

fine H is a speed rating higher than T 119mph to 130mph 85 is the load rating so higher than 82 475kg to 515kg so will be fine

by the way the port is under the handbrake, lift the small cover up

Try this on any vauxhall Hold both the brake and the accelerator down, Put the ignition on and it may flash a fault code out 10 pause 3 pause 10 pause 10 this would be P0300 goggle that to give random misfire. Or google "paperclip test vauxhall" you short out to pins in the diag port and...

Cannot take full stack out as it is shared It is being taken out to give a larger landing at the top of the stairs for my loft conversion. I do need the width about 350-400mm as it means I have a "normal" staircase. The stack does have more above the roof than below but all agreed by BR...