Search results

The shower head is my purchase after it was installed. The other 2 were the same person, the sink I managed to fix by tightening the joints. The main reason for leaking under the shower screen turns out to be the excess of water dripping from the broken shower valve. Hopefully when I fix it with...

So in that case no showers then as they are all electric. The ad doesn't state that it can't be used on electric showers.

Yep, thats life! Problems happen.

It does have a button to stop water flow and the filter shower head causes a greater amount of water to gush out the bottom of the relief value than the Triton. I have purchased a 6 pack so perhaps worth cleaning the shower heads of possible scale and trying the filter once again making sure the...

Really ? Triton showers always come out one of the best in reviews. You say to replace the PRD, I am not sure if I need the t shaped thing with the disc seals or just the disc seals. The latter you can get 6 for £5.99 on Amazon You say to throw away the shower head but this did cost almost £35...

Ok, I disconnected and reconnected all parts and even swapped the u bend round and it still leaked from the left side of the left U. There seemed to be some minor defect in the thread of the left bend but even swapping that again gave the leak on the left side, and a little on the right. I...

I've just checked and it's def leaking from the lower connection. I think that water was a drip from splash trying to clean up. It's weeping out all the time while my hand feels the above which is bone dry. I just can't fathom why it is leaking. Even tightening it up more doesn't help.

I have absolutely no idea how this is happening but our newly installed kitchen has started to leak under the sink after 2 months. I have unscrewed and re-screwed the connection several times with the black rubber seal in contact fully and yet when screwed on it starts dripping from the left...

Ok, I just put the new filter head on again to see if it still leaks and I heard water go through the pipe but it didn't come out the shower head. Must have had it turned off. Then there was a burst and it came cascading out the bottom of the sower unit. It is now worse than ever, even with the...

Tube like toothpaste.

The 151 silicone is transparent but very hard to squeeze out the tube. Not just that, the nozzle gets clogged with set sealant as does the inside of the tube when the nozzle is unscrewed.

Why oh why oh why is water coming from the area sealed to the left ?

Ok thanks for confirming and for the link. I can't believe this has happened as the shower head cost over £30 with thousands of good reviews on Amazon. In fact, I had another one previous with my Triton Enrich and it never gave any problems. The shower heads sold are compatible with all showers...

I have a brand new Triton Aspirante of Feb this year and it has started to drip quite rapidly from a tiny hole underneath the unit next to the hose connector. The only thing I have changed is a new filter shower head from Amazon that takes out all the chlorine and other muck. I have changed it...

I have had to turn the flap back the other way round as it is even worse fitted the correct way. Water is literally pouring through. When you move the hinge it acts like a pump also. Can I put silicone under the hinge even with some movement as I know it is flexible ? Even if it reduces it it...

The flap isn't consistent along the bath as you can see. It's worse this way round than the other.

Ok, I managed with great difficulty, even after soaking in warm water, to put the seal on the other way but now there are waves in the seal flap which surely suggests it isn't the correct way round?

I gave the whole plastered ceiling a watered down base coat and then filled. Def flat as sanded flush with the ceiling but like you said, it could have risen. I'll try the powder mixed with paint thanks.

I have filled a ceiling crack by correctly scraping along it with a sharp tool before filling it with Poly filler from a tube. It says it doesn't shrink etc. I then sanded it to a perfect smooth surface and painted with white paint. So why oh why oh why after several coats is a dark line still...