Search results

If it is what I think it is then this is the part you need http://www.google.co.uk/products?hl=en&q=syvac+aspirator&oq=&um=1&ie=UTF-8&ei=DsB5S-WjEdG6jAfFj7SiCg&sa=X&oi=product_result_group&ct=title&resnum=3&ved=0CB8QrQQwAg Hope that helps. Ted

You need to get a RGI in. Ted

Sounds more like a syphonic wc to me. Be careful changing the syphone part for a standard one- you may find that the bowl doesn;t clear the contents. Picture would be good here. Ted

Washer needs to be changed. Easy for a DIYer Ted

Best use a fibre washer on the connection. Be very careful not to cross thread the nut onto the plastic thread. Ted

How old is the valve? Sometimes they can let a small amount "pass" if they get old or the system water is dirty. Even when it's working correctly the pipe will get warm though- it picks up the heat from water passing through the valve. Is the pipe warm coming out the bottom of the...

Ultracom all day long. Fitted loads and loads and loads and loads Love them :P Ted

Just get a low level bath trap from plumb centre Use them all the time on the bath you have in that photo. Ted

You could always add the 2 port onto the return from the cylinder which will help with efficiency. Ted

Why don't you just convert to Y plan or S plan. Only one pump needed then. Ted

Have you got a picture? Condense pipe work should not be run in metal pipes. Ted

Yes it's fine. Most new TRV's are not flow conscious. What makes you doubt the installer? Ted

You need to buy a Dudley Turbo Flush. Make sure you get the same height one as the one you have now. Instructions on how to change it comes with the new one. Easy job for any DIYer. Ted

What happens to the indicator on the valve when you select heating only on the programmer? The next steps in identifying which part of your system isn't working correctly will need you to use an electrical tester to see which wires you have power on. If you are not confident in doing that...

Did you try the black tab on the right hand side of the valve? It sort of flicks out and across at the same time. Ted

That's a drayton valve. To test it out turn off the switch off on the left of the programmer. The indicator on the 3 port valve should go to W. If it doesn't feel around the right hand side of the valve for a black tab. Flick this out with your thumb and it should return to W. Turn the...

First thing first... Has it always done this or has it just started? Ted