Search results

Get the pressure issure sorted first. Its either being lost on the system rad valves/under the floor or more likely through the PRV and is dripping outside.

Using a neon for this type of job is ridiculous. Plus the info you need is displayed on the back of the facia panel you have removed

The boiler isnt safe to use because theres no cooker chain or control valve in the flat? :roll: :roll: What about pipework installation does that pass. If the boiler was working then there is no reason not to fill out the details for it. :roll:

When I took out my mortgage it came with 2 months free contents insurance which I dont need but I just had to cancel at the end of two months. Anyway i forgot and lost £30. Its on my list of DD. Can I just cancel it? Will they just cancel my policy or will they come chasing my for the money?

There is no pass or fail system on gas certs If theres something wrong action is taken there and then to make it safe or if its relatively minor, as are your faults, then a note is made and your're advised to get them rectified. The emergency control valve must be accesible to the tenant...

No iso valves or tails :shock:

You wont clear an air lock if its still circulating round the cylinder. If its fully pumped but no MV cut in a gate valve so you can isolate it.

Its a good idea if they look a bit "leaky". If they're not then its not a problem

Also the better trvs are liquid filled opposed to wax :wink:

Wrong The motor is bolted to the side if the fan how can one be inside and one outside :roll: Wrong Wrong Of course it can its just a few screws. Are they breaking gas regs if they're not competent to test the safety of the appliance afterwards? Yes.

Spraggo you dont know what you're talking about.

Im sorry to hear that :lol:

I could guess what the problem is but its not really a diy job. To test the spark gen just see if theres a 230vac feed to it (terminals 22 and 26)

Halstead Bentley ?

Through again. Brilliant :D

Why are you not sure. If a rads heats the room less you're saving money. The only reason not to fit them is if your rads are undersized and you'd end up leaving them on max anyway

Assuming you have some sort of cylinder for HW then your doing it wrong. The RF stat you have will only control heating. You still need some sort of timing for the HW. Im guessing by the wiring and the age of the boiler you have gravity HW and pumped CH. As I said you need a basic...

Exactly. Boilers arent designed to cope with a blockage in the plate. The HW isnt very hot so the burner keeps chucking out the power. All the power produced cant be lossed, due do blockage, so the primary thermistor quickly goes outside limits and the boiler shuts down. Eventually cools and...

The EPs are still available. The 6002 allows seperate HW times aswell as individual days http://www.uk-plumbing.com/Potterton-Electronic-Programmer-EP6002-7-Day-Independent-p-1284.html?source=googlebase

Ive never voted for any reality show in my life until tonight and its gone to Wanger. Shows like X factor sum up all thats wrong with society these days and the sooner they realise they cant make money out of the contestants (wagner wont sell any records) the sooner the show will get cancelled.