Search results

bad idea giving inexperienced ppl advice about unvented systems even if you do hold G3 unvented bpec or similar yourself which i assume you do to be giving advice on them peekay53 we all make mistakes thats why they put rubbers on pencils

if your gauge was reading zero and heating and water were still working you need to get boiler looked at with less than .5 bar pressure boiler should have shut down so either gauge is faulty or safety devices are not working as they should so please do get it checked out it could be dangerous...

nice one darren never miss a chance hey mate and nothing dopey about you mate you were right on that one no prob :lol: :lol: :lol:

valiant do an extension to prv to get abovr ground level also worcester

hey delta t2 you are not suprised they have removed it you know BIG BROTHER is watching

no gas supplier would have to put in new main to new property and does not come cheap you can get a free survey and price i think you can go on line put in details the length of the pipe run position of gas box etc and it then gives you a quote on line national grid/transco had this couple...

bit steep that delta t ask him if he will do for £2.99 you have missed the point out on that £300 thought it should read £3.00 peekay53

owaindiyer the link you put on your posting yesterday what is all that about 500 quid for gas safe card tried to log but could not am already registered but just curious give us more detail if you can

sunnie ask your solicitor friend sure he will give you the legal speak on using or loaning out of date cards sure he would tell you its fraudulent but would not expect anything else from you peekay53

probrably same way you bg lads used to at ecv diconnect regulator 3/4 blank with test point then 48in manorflex u gauge is that same as you or am i wrong again sorry i mean confused any way what ever i say you will try to turn it i still insist if your mains pressure is not that good...

the most important few words you have spoken are these "main pressure in the street in up to 75 mb" which is nearly 3 times bet you have come across 30/40 a lot more than 75 mb and i know how to test mains pressure having worked for nat grid and through that knowing 90% regulators are correct...

you still never answer do you so if the pressure is lower than expected and gov/reg is checked and ok would you still let someone fit a 19mm pe pipe where before you had an iron supply yes or no peekay53

you have now changed your mind from me not knowing standing working pressure difference and now i am being told i was wrong to say 19mm pe pipe will not supply and this is correct depending on the pressure available at meter inlet as you know this in some area can be very low have you never...

yes 19mm pipework with the correct pressure can supply multiple appliances but not with a wp of 9mb are you accepting BGSM jack is correct in this 16.5mb standing pressure down to 9mb working pressure at one point so how in the world are you telling me this is correct am i reading this wrong...

no namsag i am not confusiug anything i know the differenvce between standing pressure and working pressure and as i said name a maufacturer who is happy with 9.5mb wp as stated in previous post was stated 16.5 at govenor so standing pressure so inlet pressure at gasvalve appliance is not...

all of it except what i said

well surely that is only true if the working pressure is good enough and you as much as any one must agree that its a lottery what you working pressure can be and although transco national grid etc will say at least 24/30 mb in reality that is not the fact or do you disagree peekay53...

the thing is on the order to the timber merchants did you specify a certain treatment as your now saying you want tanilith e well never heard of tanilith e myself but if you have specified tanilith e that is what you should have recieved but did you actually specify tanalith e or just...