Search results

  1. D

    worcester r35he plus s plan wiring problem

    There is a chap on this site who has done just that to enable a different roomtat to be fit, the problem is with me the stat is still volt free where as i need 240v to operate the switch wire from the s plan having split the heating zones. The way i have got it working is still having the...
  2. D

    New Install & Boiler Advice.......

    the r35 wb in my own home has flow restrictor albeit adjustable when wound fully open gives 16lts per min @55 deg, can have 2 mira mixers at same time running although saying that there is nearly 6 bar working pressure coming in, maybe that makes a difference.
  3. D

    New Install & Boiler Advice.......

    boiler manufacturers stipulate a flow rate at a certain temp rise, say the worcester say a 14lt per min @ a 35 degree rise that means if your water temp coming into the property is 15 degrees the boiler will supply 14lts per min @ 50 degrees, so the higher the temp the less flow. If you do...
  4. D

    Additional pump on a combi system

    low loss header would cure problem with a pump for each floor, still means splitting the flow i.e one for up one for down.
  5. D

    worcester r35he plus s plan wiring problem

    if i remove tr2 picasso boiler will only work with integrated timer set to run constant. Im not impressed with worcester at all think vaillant next time.
  6. D

    worcester r35he plus s plan wiring problem

    boiler too good to renew going to have to coincide all time clocks to work together lot of hassle i know but when it amounts to a grand will put up
  7. D

    worcester r35he plus s plan wiring problem

    hi picasso, yes its wired with link out through a s plan, the only way it will work is with the integrated stat and dedicated stat tr2 calling for heat constantly, relying on the switched live through the s plan to fire the boiler, have tried it without integrated timer and tr2 stat, and it...
  8. D

    Fitting a towel rail w/ 600mm tap centres to a 1000mm space

    you could use speedfit, chrome or copper choice is yours fella all boils down to your budget, now if i read correct the question was can you use flexys to which is yes flexys can handle the pressure and the heat, personally i wouldn't use them because they will look trash and could kink...
  9. D

    Fitting a towel rail w/ 600mm tap centres to a 1000mm space

    will be fine as long as the flexy hoses you use are designed to withstand tempereture and pressure your boiler creates
  10. D

    worcester r35he plus s plan wiring problem

    Hi folks new to this site looks like good bundle of info for a bloke like myself, anyway cut waffle, i have a r35 worcester combi and have just installed underfloor heating to all lower levels, which operated via its own control center, having re piped the system incorperating a s plan it has...
Back
Top