Search results

Hi getting my plate exchanger replaced on my Worcester 28CDi tomorrow, the BG chap that came round said that i was daft not to fit a magnaclean filter at the same time, he quoted me £350 fitted so i said i would speak to the mrs etc and let him know. He then said that he needed to know so he...

i had the same problem with intermittent low pressure light, isolated the power and opened the unit to check the lever on the top of the inlet unit, it is as described as above. There is a small plastic lever which operates when the unit is turned on and rises on the plunger to make the...

many thanks :D

sorry forgot to say that i have inhibitor but i am uncertain how to introduce into the system?

12 psi is 0.82 bar, thanks for all the advice will have another look before the weekend

hi again well i checked the expansion vessel and it is reading 12 psi? is this sufficient? i notice the manual says it 7 psi from the factory

many thanks i did have a look prior to posting but was 100% what i was looking for, i am going to try to re-pressurize the thing. I have also noticed water dripping from the drain pipe on the outside of the house if that helps?

Hi all stumbled on this great site whilst trying to find a solution to my following problem: I noticed a few weeks ago that my pressure gauge was reading 3bar so i got the manual out and drained off the system until it read 1 bar then re-filled to just below 1.5 bar. All seemed well. A...