Search results

https://www.safetots.co.uk/safetots-universal-single-socket-cover.html

There are loads of sizes nowadays. Smaller ones stop the fusebox taking up too much space.

He would have called a colleague with a cherry picker and the job would have taken four hours longer while you both wait for the colleague.

As it's mainly for commercial use, they won't show the prices with VAT, but you will need to add it. That's odd, how on earth would you send something like a car engine? I had a flat pack sofa delivered on a pallet, all the wood at the bottom and all the cushions piled on top, it was over 2...

Pallet truck and a taillift HGV.

If that doesn't exist, how about a longer cloverleaf cable(assuming your charger takes that connector), rather than a full on 13A extension lead? https://www.ebay.co.uk/itm/253311188416

Use brolly fixings in the metal stud and use a setting tool. You need to drill and find out whether you have single or double layers of plasterboard, then buy the correct length of brolly fixing. e.g. for double skin... https://www.ebay.co.uk/itm/254603721608

:unsure: The black wire is not a neutral. It is the switched live. It's not really the right type of switch, but if you like how it looks, put the red in L IN, and the black in L OUT. Leave the earth where it is. If you were hoping for the LED to light up... it won't.

Does it have a relay for each side, or just one? If there's two, swap them and see if the problem moves sides.

That will be a left hand thread, so you turn it clockwise to undo.

I wanted/needed a fair few cheaper ones, as I was on a job where I knew they would get ruined quickly(taking up suspended floor tiles on an office refurb, where the screw recesses are pre-mangled and full of grit/dust/carpet glue), and I've been pleasantly surprised at how good they've held up...

For good value, I've been really liking the SabreCut ones just lately. I buy them in the longer 90mm bits... https://www.ebay.co.uk/itm/183907559013

Didn't the Virgin installer fit a.... https://www.amazon.co.uk/1STec-Internal-Housing-Splitters-Isolators/dp/B07B4KWYN9 ?

The three you linked to already are up to WF100 spec. (foam dielectric) CT100 hasn't existed for years(due to it's hollow tubed dielectric allowing water to run inside the cable), but these websites and Google know darn well that people will still search for the term 'CT100'.

Pssst, #1398 :p

RIP Ken Block. https://www.theguardian.com/sport/2023/jan/03/rally-driver-and-youtube-star-ken-block-dies-in-snowmobile-accident

That's definitely a 4.0mm metric screw, not a no8 screw. No8 screws, nominally 4.17mm, would usually measure around 4.08 to 4.12mm. A number 7 screw would measure even less than your 3.92.

Just use a breaker bar first, just to 'crack' them, then your impact driver will be fine to spin the nuts off. On re-fitting, hand thread them first to avoid cross-threading, then impact driver, then breaker bar or torque wrench to tighten.

Oh, sorry, I thought the plate in your pic had a "W"

Pawar is a surname. Maybe P4 WAR was taken. edit: It is taken, registered to a 2016 Rolls Royce Ghost