Search results

  1. R

    Screw not tight in rawlplug

    Would this work if I am in the mortar rather than the brick?
  2. R

    Screw not tight in rawlplug

    Just wondering if it would work out dropping or raising the cabinets by 50mm to catch the centre of the brick instead of the mortar
  3. R

    Screw not tight in rawlplug

    Think the wall is shot I must have hit mortar, pulled the no.8 plug out and tried a no.10 and it still spins, years ago I would have taken the cabinets down and used a wooden dook
  4. R

    Screw not tight in rawlplug

    It’s an ex council house and half of the houses were stripped and re plastered but the other half were just strapped and sheeted many years 25+
  5. R

    Screw not tight in rawlplug

    Have a brick wall that has been strapped and sheeted many years back as the houses were affected by damp. So trying to fit a kitchen wall unit and used a 8mm plug and 100x6 screw and a couple are turning in the hole. Advice please?
  6. R

    Hikvision masking

    Many thanks to @secureiam for the help and explaining my setup and settings to me, all sorted now and working fine. Thanks
  7. R

    Hikvision masking

    Looks like I will need to ask the installer although I like to solve things myself by asking on the forums. ATM I can save an area but if I draw another and hit save the first one disappears
  8. R

    Hikvision masking

    Hi new darkfighter and colorvue cameras and when I try to add more than one masked area I lose the first one, does this sound correct?
  9. R

    Tilt turn draughts

    Hi letting wind in at seal on hinge side and handle won’t fully turn to lock position, anything I can try?
  10. R

    Simple easy alarm system

    Hi looking for basic cheap alarm for 90 year old mother to operate, she has seen a neighbour with an illuminated siren box so this has got her started. So simple easy to operate either diy or professional. Any help on what to look at? Thanks
  11. R

    Recommend sockets for me

    Maid the mistake of fitting lap sockets and switches to my kitchen and a few are starting to fail on the switch, so looking for brushed steel with black inserts please
  12. R

    Opinions on these cameras

    DH-IPC-HDW2449TMP-S-IL-0280B Dahua DHI-NVR4104HS-P-4KS2/L Dahua recorder Hikvision DS-7604NXI-K1/4P Hikvision DS-2CD2347G2-LU And if you want me to look at UNV I can get parts numbers and a price
  13. R

    Opinions on these cameras

    Thanks for the honest reply
  14. R

    Opinions on these cameras

    Thanks I have asked for the model numbers, will update when I know, opinions of unv cameras ?
  15. R

    Logic esp1

    So the weather compensation would act as a frost stat in this instance?
  16. R

    Opinions on these cameras

    Hi mate, so sorry for the delay so I’ve got a price for 2x Dahua IP cameras + NVR would be 640 installed and fitted (without a hard drive) as you mentioned you had a drive. 4mp cameras 3 year parts warranty on cameras + nvr Or for Hikvision equivalent you would be £690 3 year...
  17. R

    Logic esp1

    Hi have this fitted with weather compensation and this morning with temp at -7.5° I woke up to the boiler fired up and bypass rad hot all others are controlled via tado, so has this boiler a built in frost stat or any help on why it fired?
  18. R

    Odyssey backlight

    Can I ask does this look right re the backlight bleed?
  19. R

    New rad from where?

    Always used Stelrads but can’t get trade price now so that was the reason for posting
Back
Top