Search results

Thanks for that. I think this is going to be outside my scope of knowledge looking at that link!

Thanks, thats helpful. As a trial I've tried connecting them using the Deco app and it won't do it?

No, they are EAP245's.

Hi, I have installed a mesh system using the triple pack Deco M4 units. I have the opportunity of two free TP Link AC1750 access point modules. My question is that is there any benefit adding these to my existing mesh system, of course if this is possible to achieve?

Forgot to say, when i connected the relay module to the connector on my door motor the countdown timer was illuminated.

It's fine, I appreciate its all trial and error and I'm not the perfect student! Here's an image of the relay module I bought, I'll do the tests you mention and report back. Thanks again.

Afraid not, no sound at all coming from the relay.

Ok, connected the relay module to my main circuit board and these are the multimeter readings, I'm very confused as there's no difference! When door not operating: CK and COM = 1 CB and COM = 0.9 When door operating: CK and COM = 1 CB and COM = 0.9

Ummmm....I think I have to admit my stupidity, I just bench tested it, the circuit board wasn't connected to the door opener, what a muppet! I'll follow that process this weekend and report back, thanks again.

Hi SFK, putting multimeter in CK and COM gives me the reading in the first photo (1.) And in CB and COM gives me the reading in the second photo (00.9).

Ok guys, got the molex connectors and yous were bang on, fit like a glove! I've got the new relay /circuit board, on one side I have GND, IN and VCC, on the other I have CB, COM and CK. To test the relay by connecting it to the existing circuit board as advised what are the connections I should...

Lol, afraid so.

Yer, definitely.

I've been looking for a replacement lower basket for my Currys Essentials dishwasher, model CID60B10 as most of the uprights have rusted away. The only one I can find is £53 + delivery which seems exorbitant. I've looked on gumtree, the internet generally and eBay for a second hand one to no...

Brilliant, thanks SFK, I'll do that and buy the two components first then report back, thanks again, truly appreciate it.(y)(y)(y)

Ha, ha, I'm all for learning so sounds like a plan.:LOL: I have measured the pitch and it looks about 2.5mm, I've realised the brick lights I was going to use are 240v. I've added a photo of the lights, I'm guessing I could remove the guts and fit a 12v compatible lamp/led? I think I'm going...

Will do, that was something else I learned this week, how to measure the pitch, at this rate I'l be a boffin by this Friday, lol

Thanks, I'll recheck it carefully, its probably me being a goon as in all honesty I'm learning from each post which I'm really grateful for.

Thanks guys, I'll take the cautious approach and get a relay. I'll check how many watts the light will need. I've looked closely at the Molex connector in the link and it looks different to one that would connect to my PCB, is there any other types I could look for?