Search results

The cold water storage tank is at same level as f&e tank. Yes I did fit a mixer in the downstairs cloakroom and the hot pressure is rubbish. I suppose one way to check equivilant water pressure would be to run the tap and watch the f&e tank level. Is there any way to check the coil without...

As far as I can tell,that is I can,t feel any water around the ball valve outlet and I tested it with paper to see if it had a dribble but nothing. Also there seems to be no water around the vent pipe nor is the water warm at all. However, I have made some alterations to the plumbing/heating...

Thanks for the replys, I,ve checked the ball valve setting and it shuts off the water at the correct level, however when I have to bail out the ball is submerged and hard against the seat. I thought the vent pipe was putting excess into the expansion tank, is this likely.

Hello All, I have a problem with my heating system and before I get a plumber in I,d like to see what you may think the problem may be. Here goes, I have a Baxi bermuda back boiler with a gas fire fitted, it is a few years old but has been serviced annually. The problem is that the expansion...