Search results

I apologize in advance for this Post. However, the instruction to "Push Down" before you "Pull pretty hard" reminded me of the instruction given by Anna Russel in her treatise on "How to Enjoy Your Bagpipe" wherein (between 4:05 and 4:40) she enjoins one to "Twiddle Before You Push" with a...

Outside? From where. (More information is required.) Well, NO. (In my experience, 300 Ohm Ribbon TV cable never looked like that.) It is a cable with a "single Insulated" pair of conductors. which has been allowed for use only on Extra Low Voltage installations (such as "Speaker Cables") for...

and yet G10 lamps were originally "Twist-lock 120 or 230-volt MR16 halogen lighting of 35/50 watt" Now they are also supplied as 120 or 230-volt LED lamps. "GU10" lamps are deliberately made with pins which will not fit into (other) "G" - 12 V sockets - and vice versa. Cables under boards -...

Whatever those two Junction Boxes in the 1st photo are doing, they should both be fixed to a Ceiling Joist, or some other solid timber and NOT be just "floating in space". Also, what is that "telephone cable" or "bell wire" doing? It looks as though it is going into the white "Junction Box"...

Your wording/question is a little confusing. From this, we do not know exactly what does not work. Then you wrote You wrote "The bottom one worked" - (NOT "is working") - "but the top one wouldn't work for the stair lights (the 2-way)" this appears to indicate that the "top one" did not work...

Nowhere does https://www.ikea.com/gb/en/p/vickleby-floor-lamp-white-handmade-30484483/ or https://www.ikea.com/gb/en/assembly_instructions/vickleby-floor-lamp-white-handmade__AA-2236132-2-2.pdf indicate a "sealed in-line switch" but one hopes that it comes with a BS 1363 Plug attached!

Presumably, they come with plugs to insert into sockets. Why not just use a "Power Strip"' such as one of these https://www.amazon.co.uk/s?k=power+strip&crid=D0AEI17GUV8&sprefix=power+strip%2Caps%2C352&ref=nb_sb_noss_1 some of which come with switches? Then, if you need a switch in each...

Well - there are these - and others like them...

What? What would work better than having only ONE SUPPLIER of Water, Sewerage, Electrical Energy, Gas, Communications, Roads etc. To supply such "services" by multiple means/suppliers would mean duplicating "infrastructure", which is a waste of resources. (Can you imagine two sets of water and...

From the two Red wires circled - coming from a cable which also contains an Earth conductor - is it that, in the UK, Twin and Earth cables - with two Red insulated conductors and a Ground conductor - are/were available for "Switch Loops" used for Lighting - to avoid re-designating Black (or...

Presumably, the 235 is 235 Ohms - NOT 235 Volts ! PME - Protective Multiple Earthing. (https://connections.nationalgrid.co.uk/make-a-change/replace-equipment/earthing-pme-service/ ) Why is it "their earth wires" (TN-S system?) and what is a "Tenby" system ? Yes - TN-S It looks like two...

Ceiling light fixtures need to be supported adequately (depending upon their weight) no matter in which country they are installed. While appropriately rated Ceiling Boxes are required in North America, this is not necessarily true in other countries - where the "support" and the electrical...

FYI https://www.heritage-house.org/damp-and-condensation/all-about-the-pca/the-damp-con-collection/electro-osmosis-damp-proofing-systems-an-expensive-fraud.html#google_vignette

One wonders to whom you are referring ! Well, NO! I see "what may be a spring contact "finger" on the inside of the cover in your second photo" - as I wrote in Post #4 - and not a "bayonet end". A "bayonet end" would be pointed. (A Bayonet Connector is defined - in Wikipedia - as "A bayonet...

While there may be a PCB in that blurry photo, any details cannot be discerned. I can discern no "bayonet strip end" in that picture - only several male "Spade" connectors - at the edges of the body of the device. You appear to have indicated what may be a spring contact "finger" on the inside...

For "live cable" you may mean "Switched-Line Wire"! What is meant by "the neutral from the light to plug"?

Blurry photos - and convoluted question. Those Contacts may be too weak for purpose (!) Presumably, the 5W refers to the power used by the "Bi-Metal Strip", NOT the "Heating Element" which it is switching.

I do not use a Tumble Dryer but I just use a Washing Machine. I regularly set the Washing Machine to wash in the early hours of the morning and then "hang-out" the washing (in the bright Australian sunlight,) after I get-up! No problems, after about 40 years!

In that case, who changed the plug - where and when?

If this is a 2-pin UK "Shaver Plug", the device to which it is connected is double-insulated and does not have an Earth connection. It is a Power-Supply in which the output is isolated from the Mains. The "output" if this Power-Supply is fed to an induction coil in the Base for the toothbrush...