Search results

Ok now i closed in all the other trv;s then turned the heating off then i opened the bleed and took approx 6 pints out of the bleed( i bled into a pint pot) the feed line got hot and the rad started to get hot, i assume this is just hot water in the system. i then turned the heating back on and...

ok breezer, these valves have been open. Now i switch off the heating then open the top bleed until i get a steady flow of water, then close in this bleed, then switch the heating on,,,,is this correct ?

Ok lads 4 out of five are now working fine and the last one is the one nearest the boiler. I switched the heating off then opened up the left hand top bleed and took aprrox 6 pints of water the i opened up the right hand bleed and bled the same 6 pints. i then put heating back on and it is...

Hi You mean open up and bleed both top bleed valves,if this is the case i have tried this and still no luck. I have also tried fully closing in the thermostat on each radiator with the heating off ( which i believe is the return line) and totally filling each radiator, then switch the heating...

I am having problems with my heating system.2 out 5 of my radiators are not working as they should. The 2 non working ones are the ones nearest the boiler ( i live in flat, all on the same level and have a glow worm series 2 boiler). I opened up the bleed on the non working rads and took out...

I have a hot water tank through the wall in a kitchen cupboard (this cupboarb also houses the boiler). I have a cold water header tank in the loft space.

Hi I have a Glowworm fuel saver MKII and i have an instant shower. I now want to install a power shower,,,,can anyone tell me if this is possible?