Search results

I usually give up after the o, Fluo' Simples lol :mrgreen: :mrgreen: :mrgreen:

Mmmm Erm are you sure you are up for doing this :?: I'll give you a clue they start with, Cho.......

Before you disconnect the headlight, switch the h/lights on, with the level adjust set to high,(i.e. 0) then disconnect the h/light, this will extend the adjuster arm out of the motor asy. and give you a bit more free play when you twist the motor out of the h/light. and don't just pull the ball...

Anything to do with the 3ph MCB per chance :idea:

Ye 10mm steel plate flooring is all the rage these days :mrgreen: :mrgreen: :mrgreen:

Mmmm.... me thinks Holmslaw has spent too much time in the horizontal position, and lost a grasp of dimensions lol. :mrgreen: :mrgreen:

I know you chaps love your pickies, so thought you might like these, a nice example of how not to do it! and from up top minus the tape;

Have a look on eBay for a Kewtech kt115, just seen a brand spanker on there, on a buy it now for about £35! quality bit of kit for not much more than than a cheepo nasty thing :wink:

Two things about the crimping tool; 1, the jaws are the wrong way round ie. the yellow one should be closest to the piviot not the red ones, but that shouldn't make much differance using the blue terminals. 2, the jaws look like a set i've got, and on them one side of the jaw crimps more...

This was from an extension lead that was not overloaded and witch had a thermal cut out on it. Not one of mine i may add it's one that failed a PAT test. p.s. the pic doesn't quite show what a melted mess it really is.

vc

Reminds me of when i was a kid and i decided to make an electro magnet, found a big steel bar in the garage that was bent into a U shape, and a roll of bell wire. Joined one end of the wire together and wrapped the lot around the bar, i go into the kitchen and switch the power off to the garage...

Yes it dose, you say an added socket, not too sure what you mean by this, is it an aditional light fitting?? ie two lights running off one switch?

Reds -> C Brown -> L1 Blue -> Blacks All earths together Thats asuming the the brown/blue cable is going to the light fitting, look in the light fitting first to see if it is the brown/blue.

Oh Knickers! bsa has got an evil twin, aaggghhhhhhhhhhhhhhh :!: :!: :!: :!:

ooh thats a bit off calling the missis junk. lol :D a very happy christmas to you all!

It is the orange & white wires, but you are NOT allowed to touch them :!: Only BT engineers are allowed to connect the incoming cable, if you get caught messing with it, BT can disconnect you permanently!! and expect a heavy fine :!: :!: