Search results

Hi Thanks for your reply , yes that is exactly what I am wanting to do ,did not think they done a 10x15 isolator Valve ,perfect thank you very much . cheers spike

Hi Is the male thread on a 15mm compression isolator the same as on a WC inlet ! . and do they do a 15mm to 10mm flexi compression fitting both ends . cheers spike

This is what I meant :MK Logic a range of 13A fused connection units and 20A DP Switches .

Thanks for your reply , yes they are 13A should of known that .

Thanks for feedback , I always thought if you did not install as per manufactures intructions the warranty could be at risk ! . ps: they must have thick flexi cables then for there appliences to take 16A , take it they do not fuse the plugs there ! , I know they used to use them male round plugs...

Just looked at the product details on AO.com and this is what it say's . Installation Electrical Connection 2.35 KW Fuse Rating 13 amps (Cable/Plug Not Included) . So how there tech info sheet says needs a 16A supply I don't know , allthough I am not keen on fitting a 13A plug n socket , which...

Bosch say's requires a 16A Mains connection lead HO5 W-F or higher then An all pole isolating switch with a contact gap measuring at least 3mm must be available during installation". I worked it out at 10.8A max ! .

Hi Question: Can I take a feed ( 2.5mm2 ) for a 20A fused DP switch from the ring main to feed a 16A load Bosch Cooker ! , there will be a lot of work to run a dedicated feed back to the meter . PS: The feed for the old cooker is from a single 13A socket on the ring ! cheers spike

Very funny "NOT"

No it Doesn't .

No it is not the DNO fuse , how on earth would I do that ! , this 3 phase fuse box is in my workshop , feed to it is via a 3 phase 63A / 30mA , taken from "MY" main 3 phase breaker , in a separate building where the DNO ( The Grid ) comes into the property . I can put whatever fuse I want to...

OK , guys got it now , will get some 16mm tails , and a 100A RCD and use the MCB's that I first was going to use . Hi Thanks for your feedback , the lights (lights 60W ) are only for the Tack room x1 and grain store x1 , chicken room x2 , the sockets are for these rooms only , they are part...

Attached BS7671

Does the supply cable have to take a 83A load , not the 63A ! .

I could use 2x16A instead of the 20A and use a 20A instead of the 32A ! .

Sorry yes I mean RCD , I understood that the 63A RCD is to take the full load of the MCB's it supplies , however it also protects the cable feeding it from its source , no! , there will never be a time that all the MCB's will be on full load .

Hi I need to put a 63A RCB 6 way weatherproof consumer unit ( Garage unit ) with 2x6A , 2x20A , 1x32A MCB's, in my workshop at my farm , now the supply to it, comes from the Main 83A 3 phase fuse box on the other side of the wall where I want to mount this unit , the length of cable would be...

Hi Has any one heard of , " Birdbrand " as in there Danish Oil , I did send them a email asking what percentage of "Tung Oil" is in there product ,but no answer up to now . I want it for a Oak Dining room Table , and a friend mentioned this maker . http://www.birdbrand.co.uk/...

Hi I have filled the cracks with epoxy 2 pack mixed with wood dust , then belt sanded the whole Table , then blow of ,then wiped with a dry cloth and then cleaned the surface with a rag damped with white spirit , then applied one cote of Polyurethane satin finish varnish ( solvent type )...