Search results

at a guess it could be the module gone as i get this problem alot. have a look for burn marks or dry joints on the board

at a guess its the main pump jammed, as most d/w leak at the seals and when people go on holiday for a week or 2 the bearings jam. if you take the side panel off or look and see if u can get at in from the bottom u might get it free by givin it a flick..

i had one on a asta van with a very big sound system that put out 14volts 40 amps and i think it was a standard part.. hope this helps u

you need to put ur email in your profile.. ____________________________________- Moderator email address removed

give me the model and product number and i will see if i can help you.

yes its easy... if stuck email me and i can send you a photo link to help u

yes i do . u need to ture a screw on the pressure switch 1/2 a turnto the right but there is about 9 of them. if you can email me i can send u a photo of witch one as i cant leave any links.. forum rules.. if not it is the screw nearest the part where the hose goes into.. but be careful to...

the timer.. thats about it. sorry

yes had the same problem on 2 bosch machines this week and they were both the board (module). but it could also be a coin stuck up the tube from the pump. 5p coins are the ones that always get stuck in bosch.

if you turn the machine off at mains switch its just the pressure tube blocked up. if you have to turn the water off its the valve.

or try this applianceforum.co.uk /modules.php?name= Downloads&d_op= viewdownload&cid=11

ok you will have to email me to get link... will not let me help u..

have found you a Service manual download pdf for your model. it has the fault codes on it so this should help u out link to the file is http://www.applianceforum.co.uk/modules.php?name=Downloads&d_op=viewdownload&cid=11[/url]

i dont sorry but can talk u through it if you like. can get some photo 4 u

can you get me the prod number off the machine. will check on this for you. can send you a service manualpdf file if you like ________________________________________- Moderator please see 7

sorry. the model number should be on the back or around the door area ________________________________________ Moderator please see 7

Can you look for the model number then let me know what it is and i will try get it for you in a pdf file. Then stick it online for you to download.

I have some bearings going cheap.. mail me if needed ________________________ moderator email address can be shown in your profile

how much powder do u use? and what powder/liquid If you overload on a 3kg wash the only ting that will happen is a poor wash (wont clean as well)

easy.. just get a srewdriver well 2 small ones are better, like the electrical ones and all u need to do is flip the door catch back into place. if it happens again u might need to adjust the door clip that sticks out on the machine..