Search results

Hi all I have a creda 8.5kw shower,10 months old which has started playing up. When you turn it on to the setting we normaly have it on it does not get hot, the full power light does not come on till you turn the dial over half way, this results in cold water blasting out. I am getting a...

Does the cistern lid just lift off or do you have to unscrew the push button before it lifts off? If it just lifts off I think it could be a Pacific Lisbon flush valve, which is no longer available but you can get an alternative. If you have to screw the push button out, it could be a Siamp...

Got this from job centre plus Job No: HUW/35656 Wage - £23,000 - £26,000 PER ANNUM Hours- 37.5 PER WEEK, DAYS AND TIMES TO BE ARRANGED Location -YORKSHIRE HU1 Duration -Permanent Date posted- 28 September 2009 Closing date- 07 October 2009 Pension available All job applicants...

Or there is always http://www.0800buster.co.uk/ similar to the one above.

I presume you have a Siamp float valve? If so the diaphragm will have a tiny split, you can get new ones from http://www.lunns.net/cisternspares/

I suppose it saves the customer trawling through the phone book! http://www.jobcentreplus.gov.uk/Internet/viewVacancy.do?selectedVacancy=19&ref=EAL/39647

The part you need is = Dal 20.26.28 Flush Valve Cartridge You will find this on the link for Lunns given in previous post Just check before you order that the bellows under the cradle is retracting properly, i.e. not pushing down on the top of flush valve.

You are welcome & thanks for the comment. Brad

You might want to try reading all the thread.

Yes or you can measure the threaded part of the cradle once you have lifted the cistern off the pan.

Cleaning the seal on the inside usually makes the problem worse, it's doubtfull that the outside seal will have perished. You will not get a replacement seal, you will need to replace the whole unit.

The vibrating noice will more than likely be from the flush seal leaking. On the Pacific flush valve it has 2 seals, the one you can see round the base & another on the inside of the unit. The seal you can see on the outside does not lift to let water into the bowl, its the one on the...

The level 3 link is going to the level 2 page.

Try here http://www.showerdoc.co.uk/ Post the pics in the forum & they should be able to i.d. it.

Is this an upstairs or downstairs toilet? Is anything else affected e.g kitchen gulley?

Have a look at this http://www.lunns.net/cisternspares/roca_flushvalve_installation.pdf That's assuming it is aRoca flush valve, I only put that pic up to give you an idea what you should be looking at.

The flush seal will be letting water through all the time. You will find this at the bottom of your flush valve & will look something like this

Have you had the drain company put a camera down the line to check for any problems yet? The Council probably won't do this. If not that would be the first thing to try, as putting a macerator in might just mask any problems for a while, but they will still be there. Phone round & get...

If you think you can stomach it then go for it. I have seen quite a few sole traders build up to 3/4 vans on the road now. These do training courses http://www.waterjetting.org.uk/