Search results

  1. L

    toilet flush overflowing

    HI try pushing the flush pipe further in toward the pan.
  2. L

    air in system

    HI on the front of the pump.big flat headed screw.
  3. L

    Where to buy a replacement old-style low-level cistern

    HI try local plumbing merchants,plumb centre,plumbase.does not have to be exact but the bottom holes have to match to fit on the existing pan.
  4. L

    Problem with Grohe concealed cistern

    HI replace the pan
  5. L

    Where to buy a replacement old-style low-level cistern

    HI you will find it difficult to match,so take old cistern and shop around.good luck. :D
  6. L

    How on earth do you fit the shower tray waste?

    HI the trick is before buying the tray make sure that the waste hole is at the front or in a place that is within hand distance.and always leave cut out in the floor boards for future services.
  7. L

    Olive

    HI Or you can buy a tool called olive remover 15mm or 22mm.
  8. L

    lack of cross-bonding causing shutoff?

    HI IDEAL combi two months old boiler which would not fire.so my mate called engineer from ideal because it was under guarantee and the fault was with the main earth bonding.because the main earth bonding was not connected to the gas pipe the boiler was not firing up .I still do not understand...
  9. L

    No water from new shower

    HI did you fit automatic air vents on both hot and cold pipes ? :D
  10. L

    How on earth do you fit the shower tray waste?

    HI Fitting shower tray on the floorboards=cut out piece of floorboard outside the tray area so that you can fit/adjust the waste fitting shower tray on the concrete floor=raise the tray using bricks/blocks then you have gap to fit the waste.
  11. L

    Fitting power shower

    HI best way is 22mm pipes separate feed for shower with 2 automatic air vents at the highest point.
  12. L

    Potterton combi 80 boiler (baxi)

    HI sounds like air pressure switch
  13. L

    Fitting a Steel bath

    HI build frame next to the panel and make sure the frame is tight pushing bath upwards.also fix few battens in away so that they are pushing bath to the corner.no need for brackets. :D
  14. L

    air in system

    HI try bleeding pump screw if continues then boiler heat exchanger might be blocked up .try descaler for that.
  15. L

    Siphon made of pot

    HI never seen before.try ebay :D
  16. L

    Hlastead Finest Gold Hot Water Problem

    HI could be 1.hot water sensor fault 2.secondary heat ex blocked
  17. L

    baxi needs bleeding

    HI sometimes it takes few days for all noise to disappear.in the meantime try these 1.pump speed 3 2.bleed rads again 3.look for a air vent and bleed it 4.open big screw on the pump and release air
  18. L

    leaking pressure release valve on old heating system

    HI take a picture of the valve and take it to the plumbing merchants they should be able to order another one.
  19. L

    broblem with Vailant ecomax 622/2e

    HI well still waiting 8)
  20. L

    baxi boiler pilot light problem

    HI need more details on the boiler
Back
Top