Search results

good people do it when they powerflush too as it can knock off some sludge that’s sticking.

Basically take your shoe off. Support the rad with your knee. Ie hold it against the wall and whack it plenty of times on the top corners and bottom corners. Sometimes this clears sludge build up.

You could try tapping the radiatorhave you checked the valves yet to make sure you get water out them both!

Forgive my ignorance but are all rendered houses done with lime mortar. Seen a lot of items saying no sand and cement renders ever as they can trap moisture. Thinking of rendering my external walls on 1930s build

Anyone know anyplace I can get the. Cheapest upvc windows and doors And bifolds from. Doing a summer house, I want the grey colour!

you can dodge some waits by turning java off in your internet settings. Can on wickes site anyway as I’ve being doing it

Let us know how you get on

lol I keep taking what people post for a certain like they know exactly what they’re on about. Be funny if it turned out to be that

It would buy it would start back up when cooled. Check the pump is working fine if so you need a engineer as there’s too much stuff that could create noises and a person who’s experienced needs to hear it. If the boilers not set right on the gas or a flue terminal has blown or worse this can...

just a coincidence lol haha

you never done a job and they try to get you back as a callback because something stopped working that you didn’t even touch When I say it’s a coincidence the look they give

http://www.alidymock.com/ that’s the website but he’s on YouTube. He did a bathroom too and explains a lot

I’ve gone 400mm centres on everything YouTube aliydymock or summat like that He did a series on YouTube on building one but he was very thorough.

Nails for horizontal loads is best. Screws can snap easily when weight is put on them horizontally That’s what I’ve always done anyway. On anything big with weight! Shelves fine lol

Nice well done

I would suspect 4x2 for walls is plenty. as for the base it depends on the span the joists are running. Just google floor joist span table and you’ll see it all. I’ve just used 5x2 floor joist at 2.5 m span for a 5x4 building. There’s a little flexi but nothing major. Although I would use 6x2...

Sounds like you mainly need more flow. Get your water tested by supplier and see what’s available then get someone in to give you an idea. Probably need a new main and new pipes running around the house

I’m sure on the open impeller with the housing off it would be fine.

Hg Scallaway is very good for scale. Best stuff I’ve used

Jesus! Never noticed that in the pic.